Viking VGIB151TNSS Use & Installation Manual
Outdoor built-in trusear series infrared griller
Hide thumbs
Also See for VGIB151TNSS:
- Specification sheet (7 pages) ,
- Manual (52 pages) ,
- Planning manual (28 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Manual
Advertisement
Table of Contents
Related Manuals for Viking VGIB151TNSS
Summary of Contents for Viking VGIB151TNSS
- Page 1 Viking Use/Installation Guide Viking Range Corporation 111 Front Street Greenwood, Mississippi 38930 USA (662) 455-1200 For product information, call 1-888-VIKING1 (845-4641) or visit the Viking Web site at vikingrange.com ™ Outdoor Built-In TruSear Infrared Griller F20330E EN (040408J)
-
Page 2: Important: Please Read And Follow
BASIC SPECIFICATIONS IMPORTANT: DANGER PLEASE READ AND FOLLOW Description VGIB151T VGIB242T * Before beginning, please read these instructions If you smell gas: Overall Width 15-5/16” (38.9 cm) 26 1/4” (66.7 cm) completely and carefully. 1. Shut off gas to the appliance. Overall Depth •... -
Page 3: Natural Fixed Piping Connection
DO NOT forget to place the installer supplied gas valve in an accessible location. NOTE: If using a Viking GSH12 flexible hose, remove the 3/8” flare adapter and attach hose to the 1/2” (1.3 cm) male flare on the regulator assembly. -
Page 4: Lp/Propane Tank Connection
LP/PROPANE TANK CONNECTION LEAK TESTING Although all gas connections on the grill are leak tested at the factory prior to shipment, a complete gas tightness check Outdoor grills orificed for use with LP/Propane gas come equipped with a high capacity hose/regulator assembly for must be performed at the installation due to possible mishandling in shipment or excessive pressure unknowingly being connection to a standard 20 lb. -
Page 5: Performance Checklist
INSTALLATION PROCEDURES FOR BUILT-IN INSTALLATION BUILT-IN CLEARANCE DIMENSIONS 1. A minimum of 6” (15.2 cm) from the sides must be maintained from the side of the burner above the cooking surface to adjacent vertical combustible surfaces. The unit is not to be located under overhead unprotected combustible 15”... -
Page 6: Ventilation For Built-In Installations
BEFORE LIGHTING YOUR TRUSEAR™ INFRARED GRILLER VENTILATION FOR BUILT-IN INSTALLATIONS Prior to turning the gas on, inspect the gas supply tubing or hose. Look for evidence of abrasion, cuts, wear and tear, or other damage which could require replacement prior to use. Make sure all burner control knobs are off. Do not attempt to light the burner if the smell of gas is present. -
Page 7: Cleaning And Maintenance
TruSear Infrared Grilling tips CLEANING AND MAINTENANCE Infrared grilling produces intense heat which quickly sears the meat. Searing locks in flavor and juices while allowing Any piece of equipment works better and lasts longer when maintained properly and kept clean. Grilling equipment is the outer surface to absorb smoke and food aroma that is produced as grease and drippings are vaporized by the no exception. -
Page 8: Service Information
Have the following information readily available: workmanship in normal household use for a period of twelve (12) months from the date of original retail purchase. Viking Range Corporation, warrantor, agrees to repair or replace, at its option, any part which fails or is found to be defective during the warranty period.