NETGEAR XAV2501 - Powerline AV Ethernet Adapter User Manual page 34

• If any of the following conditions occur, unplug the product from the electrical outlet and
replace the part or contact your trained service provider:
• The power cable, extension cable, or plug is damaged.
• An object has fallen into the product.
• The product has been exposed to water.
• The product has been dropped or damaged.
• The product does not operate correctly when you follow the operating instructions.
• Keep your system away from radiators and heat sources. Also, do not block cooling vents.
• Do not spill food or liquids on your system components, and never operate the product in a wet
environment. If the system gets wet, contact your trained service provider.
• Do not push any objects into the openings of your system. Doing so can cause fire or electric
shock by shorting out interior components.
• Use the product only with approved equipment.
• Allow the product to cool before removing covers or touching internal components.
• To help avoid damaging your system, be sure that the voltage selection switch (if provided) on
the power supply is set to match the power available at your location:
• 110 volts (V), 60 hertz (Hz) in most of North and South America and some Far Eastern
countries such as South Korea and Taiwan
• 100 V, 50 Hz in eastern Japan and 100 V, 60 Hz in western Japan
• 230 V, 50 Hz in most of Europe, the Middle East, and the Far East
• Be sure that attached devices are electrically rated to operate with the power available in your
location.
• To help prevent electric shock, plug the XAV2501 Powerline AV+ 200 Adapter into properly
grounded electrical outlets.
• Use only approved power cables. If you have not been provided with a power cable for your
system or for any AC powered option intended for your system, purchase a power cable that is
approved for use in your country. The power cable must be rated for the product and for the
voltage and current marked on the product's electrical ratings label. The voltage and current
rating of the cable should be greater than the ratings marked on the product.
• Observe extension cable and power strip ratings. Make sure that the total ampere rating of all
products plugged into the extension cable or power strip does not exceed 80 percent of the
ampere ratings limit for the extension cable or power strip.
Technical Specifications
XAV2501 Powerline AV+200 Adapter User Manual
v1.0, December 2009
A-3