Sharp MX-2310U Installation Manual page 28

(4) Dehumidifier heater control switch installation
1) Connect the WH harness to the dehumidifier heater control
switch, and attach the dehumidifier heater control switch.
2) Cut away the dehumidifier heater control switch section on the
rear cabinet.
Attach the dehumidifier heater control switch label to the rear
cabinet.
B. Installation of the heater kit
(1) Assembling of the heater unit
1) Attach the heater to the heater mounting plate and secure it
with the screw (M3 x 6 S-tight).
Attach the clamp, and fix the harness to the clamp.
2) Attach the heater mounting plate to the T-Heater cover and
secure it with the screw (M3 x 6 S-tight).
3) Attach the CSS-WH harness to the heater mounting plate, and
connect the harness of the dehumidifier heater. Fix the earth
wire with a screw.
MX-2310U Dehumidifying heater 3 – 5