Adding A Destination - Eclipse AVN5495 Owner's Manual

Navigation guidance
3. Changing the search result route

Adding a destination

After setting a destination, up to 5 more destinations can be set.
In the following situations, set an additional destination.
● When setting a transit point between the present location and set destination.
● When changing the set destination into a transit point and setting a new destination.
Using the same method as for setting a destination, touch
(
See "Setting by directly moving the map"
91 and
"Set using a map retrieval method"
Touch Route
Touch
Add
Select the map retrieval method to
display the map on which a
destination is to be set.
●
"Map retrieval methods"
"Performing operations on a retrieved
(page
map"
●Destinations can be set using detailed maps with a reduction scale under 0.5
miles.
●Geographical points on maps representing set destinations are automatically
registered (up to 100 points) and can be used to retrieve a map when setting a
destination. After exceeding 100 points, the oldest entry is deleted every time a
new one is entered. Unnecessary points can be deleted. (Refer to the Section
"Deleting destination archives" on page 162.)
●If stops along the way are set, they could be deleted from the route when you
add a new destination, depending on the location of the points involved.
●When 2 or more destinations are set,
102
.
for Destination.
and
, ).
48 85
Add to
on page 89,
"Set from a registered point"
on page 92).
Reorder
appears.
to add a new destination.
on page