Konica Minolta bizhub 223 User Manual page 26

3.2 [Basic]
Settings
[Background Removal]
[Main Screen]
bizhub 423/363/283/223
[Bleed Removal] Select this setting to remove background prints of
the original. Normally, select [Bleed Removal].
[Paper Discolora- If the original to be scanned has a colored back-
tion Adj] ground, adjust the background with this button to re-
move it before copying.
[Background Re- [Light]
moval Level]
[Stand-
ard]
[Dark]
[Auto]
Press this button to return to the basic settings screen with the changed
settings applied.
Each time this button is pressed, the
background density is lightened by one
level.
Press this button to select the third level
from the right (default).
Each time this button is pressed, the
background density is darkened by one
level.
The background density is detected au-
tomatically and adjusted to the optimal
level.
You can specify [Auto] for [Background
Removal Level] only when [Standard] is
selected for the density. Even if [Auto] is
specified for [Background Removal Lev-
el], [Auto] is canceled for [Background
Removal Level] if the density is selected
to other than [Standard].
3
3-5