Konica Minolta bizhub 223 User Manual page 11

2.1 Control Panel and functions
Overview
4
Power Save
5 Mode Memory
6 Utility/Counter
7 Reset
8
Interrupt
9 Stop
10 Proof Copy
11
Start
12
Data Indicator
13 C (clear)
14 Keypad
15
Guidance
16
Enlarge Display
17
Accessibility
18 Access
19 Brightness dial
20
User Box
21
Fax/Scan
22 Copy
bizhub 423/363/283/223
Press this key to enter Power Save mode.
While the machine is in Power Save mode,
the indicator on the Power Save key lights
up in green and the Touch Panel goes off.
To exit from Power Save mode, press the
Power Save key again.
Press this key to recall registered fax/scan
settings.
Press this key to display the Utility screen
and the Meter Count screen.
Press this key to reset all settings (except
programmed settings) entered using the
Control Panel and Touch Panel.
This key is not used in the enlarge display
mode.
Pressing this key while copying, scanning or
printing temporarily stops the operation.
Press this key to print a single proof copy to
be checked before printing a large number
of copies.
Press to start the copy, scan or fax opera-
tion.
Flashes in blue while a print job is being re-
ceived. Lights up in blue when a print job is
queued to be printed or while it is being
printed. The indicator lights up in blue when
there is saved fax data or unprinted fax data.
Press this key to clear a value (such as the
number of copies and a zoom ratio) entered
using the Keypad.
Use the keypad to enter the number of cop-
ies, zoom ratio, and a fax number.
This key is not used in the enlarge display
mode.
Press this key to switch between the en-
larged display screen and the standard size
screen. If you use PageScope Authentica-
tion Manager for authentication, the En-
large Display screen is not available.
Press this key to display the screen for con-
figuring settings for user accessibility func-
tion.
If user authentication or account track is en-
abled, press this key after entering the user
name and password (for user authentication)
or the account name and password (for ac-
count track) in order to use this machine.
Allows you to adjust the brightness of the
Touch Panel.
This key is not used in the enlarge display
mode.
Enters Fax/Scan mode. While the machine is
in Fax/Scan mode, the indicator on the
Fax/Scan key lights up in green.
Press this key to enter Copy mode. (As a de-
fault, the machine is in Copy mode.) While
the machine is in Copy mode, the indicator
on the Copy key lights up in green.
2
Reference
-
p. 2-7
p. 2-6
p. 2-5
-
p. 2-5
p. 2-12
p. 2-5
-
p. 2-11
-
-
p. 2-10
p. 2-8
p. 2-10
-
-
p. 2-6
p. 2-5
2-3