Job History] - Konica Minolta bizhub 223 User Manual

4.2 Configuring destinations
Settings
[Address Book]
[Other Dest.]
[Scan Settings]
[Check Address]
4.2.2

[Job History]

Select the desired destinations from the list of previously sent destinations.
%
Press [Job History].
Settings
[Job History]
[Scan Settings]
[Check Address]
bizhub 423/363/283/223
The registered destinations appear as buttons, allowing you to select the
desired destinations.
Search the registered destinations in this machine for the desired destina-
tion by specifying the transmission method or destination name as search
criteria.
• [Address Type]: Search for the desired destination based on the trans-
mission method. You can select group destinations.
• [Index]: Search for the destinations by specifying indexes that were
specified when destinations were registered.
Configure various settings for scan operations. For details, refer to
page 4-9.
The selected destinations appear, allowing you to check the destinations
before sending data. For details, refer to page 4-17.
Up to 5 destinations that have been previously sent are listed on a most-
recently-used-destination-first basis, allowing you to select the desired
destination.
Configure various settings for scan operations. For details, refer to
page 4-9.
The selected destinations appear, allowing you to check the destinations
before sending data. For details, refer to page 4-17.
4
4-6