System Settings - Konica Minolta bizhub 223 User Manual

11.5 Administrator Mode Overview
Item
[Network Error
Code Display
Setting]
[Reset]
[License Settings]
[Edit Font/Macro]
[Job Log]
Reference
- The following functions are available only when a Hard Disk is installed.
– [License Settings]
– [Edit Font/Macro] (This item is displayed, but cannot be specified.)
– [Job Log]
11.5.2

System Settings

Reference
- To use this machine as a scanner with the application software under TWAIN, install the dedicated driv-
er software KONICA MINOLTA TWAIN. For details, refer to the TWAIN driver manual in the CD sup-
plied together with this machine.
Item
[Machine Setting]
[Register Sup-
port Information]
[Network TWAIN]
[User Box Setting]
[Stamp Settings]
[Blank Page Print
Settings]
bizhub 423/363/283/223
Description
Specify whether to display the network error code.
Clears all settings for the network, controller and destinations.
Allows you to issue a license and enable functions. Also, a request code can be is-
sued.
Adds font or macro.
Allows you to create and download log data of the jobs that were executed in this
machine.
Description
Changes the registration information of this machine.
Specify support information (such as contact name, corporate URL, or online man-
ual URL) of this machine. To display this information, select [Information] - [Online
Assistance].
Specify the time to release the operation lock when scanning (excluding push-scan-
ning).
Define the User Box functions such as deleting an unnecessary User Box or speci-
fying the document deletion time. If necessary, configure settings to enable saving
or reading a document in or from the external memory.
Register a header or footer. In addition, in [Fax TX Settings], specify whether to can-
cel the stamp setting for fax transmission.
Specify whether to print contents configured in [Stamp/Composition] on blank pag-
es.
11
11-23