Pc-Fax Rx Settings - Konica Minolta bizhub 223 User Manual

10.4 Administrator Settings (G3)

PC-Fax RX Settings

Specify whether to use the PC-Fax RX function. To use the function, configure the following items.
If two units of Fax Kit FK-508 are installed, and [Individual Receiving Line Setup] is set to [ON] in Adminis-
trator Settings, you can select either [Fax Line 1] or [Fax Line 2] to configure settings for each line. For details
on [Individual Receiving Line Setup], refer to page 10-19.
If no Hard Disk is installed, the following screen appears.
Reference
- The documents received by fax are saved in the TIFF format in a User Box.
d
Reference
For details on PC-Fax RX, refer to page 7-4.
Item
[Receiving User Box
Destination]
[Print]
[Password Check]
bizhub 423/363/283/223
Description
You can specify destinations in a Memory RX User Box or a Specified User
Box.
If no Hard Disk is installed, the destination is a Memory RX User Box.
If [Specified User Box] is selected, destinations are saved in a User Box
specified with an F code subaddress.
Specify whether to print a fax after receiving.
Specify a communication password (up to 7 digits).
10
10-26