Epson CX5200 - Stylus Color Inkjet Read This First

EPSON Stylus CX
Macintosh OS X 10.2 Users
If you're using Apple
install a new version of the TWAIN driver for use in OS X 10.2 Native mode
instead of the driver that comes on your EPSON Stylus CX CD-ROM.
Follow the instructions on the Start Here sheet and in the Macintosh Software
Installation booklet that came with your EPSON Stylus CX to set up the Stylus
CX and install the basic Stylus CX printer software. However, follow the steps
below instead when you come to the instructions titled "Installing Additional
Software for Mac OS X."

Installing Additional Software for OS X

1. After your Macintosh restarts, double-click the
open it, if necessary.
Do not install EPSON TWAIN 5 from the CD-ROM.
Do not install EPSON Scan to File from the CD-ROM.
2. Double-click the
for OS X. Follow the on-screen instructions.
3. Double-click the
PhotoImpression. Follow the on-screen instructions.
4. Double-click the
icon to install your on-screen documentation.
Installer
5. Open the OS X
double-click
the printer list.
6. Close Print Center and remove the CD-ROM, then download and install the
new TWAIN driver as described on the back of this sheet.
®

Read This First

®
Macintosh OS X version 10.2, you need to download and
Film Factory Installer
PhotoImpression Installer
EPSON Information Center
Applications
. Make sure your Stylus CX model name appears in
Print Center
EPSON
icon to install Film Factory
folder, then open the
®
CD-ROM icon to
icon to install ArcSoft
or
User's Guide
folder and
Utilities
™