Epson Stylus CX5200 Start Here Manual
Epson Stylus CX5200 Start Here Manual

Epson Stylus CX5200 Start Here Manual

Epson stylus cx5200: quick start
Hide thumbs Also See for Stylus CX5200:

Advertisement

Start Here
EPSON Stylus
1
Unpack
1
Make sure you have all the parts shown here. If any parts are missing,
contact EPSON as described on the back of this sheet.
Paper support
2
Remove any tape and packing materials, as shown.
Note: Make sure you remove all the tape. There may be packing
materials or tape in different locations. Do not remove the sticker
covering the USB port yet.
3
Lift up the entire scanner unit.
4
Peel off the tape from the ink cartridge holder and from the top of the
printer. Make sure you don't leave any tape inside.
5
After you have removed all the packing materials, lower the
scanner unit.
EPSON Stylus CX5200
USB cable
CX5200
®
Software
CD-ROM
Ink cartridges
Booklet
Feeder guard
Don't remove
this sticker yet

Advertisement

Table of Contents
loading

Summary of Contents for Epson Stylus CX5200

  • Page 1 EPSON Stylus Unpack Make sure you have all the parts shown here. If any parts are missing, contact EPSON as described on the back of this sheet. Paper support Remove any tape and packing materials, as shown. Note: Make sure you remove all the tape. There may be packing materials or tape in different locations.
  • Page 2 Unlock Open the scanner lid, as shown. Remove any packing materials under the lid. Slide the transportation lock back to the unlock position. Caution: Make sure you unlock the scanner, or it won’t work. Close the scanner lid. Attach the Parts Insert the paper support into its two grooves.
  • Page 3: Install Ink Cartridges

    Plug In Plug the Stylus CX into a grounded electrical outlet. Do not connect the USB cable yet. Install Ink Cartridges Press and hold the On button for 2 seconds. The green light flashes and the scanner carriage and print head move. Press the On button Lift up the entire scanner unit.
  • Page 4: Load Paper

    continued Lower the scanner unit. The Stylus CX begins charging the ink delivery system. Charging takes about 2 minutes. The green light flashes and the Stylus CX makes various sounds. Don’t turn it off while the green light is flashing or you’ll waste ink. Load Paper Flip the feeder guard forward.
  • Page 5: Install Software

    The Software Installation screen opens automatically. Click Install. Note: If the install screen doesn’t open automatically, do the following: For Windows XP: click Start > EPSON CD-ROM icon. For Windows 2000/Me/98: double-click double-click the When you see the license agreement, read it and click Agree.
  • Page 6: Copying Documents

    EPSON User’s Guide for instructions. Note: Your CD-ROM also includes EPSON Software a photo-management program that supports Exif Print. If you want to install Film Factory, see your on-screen EPSON User’s Guide in the EPSON Information Center for instructions. Copying Documents Open the scanner lid.
  • Page 7: Copying Photographs

    Make sure you’re using the USB cable that came with your Stylus CX. Try connecting it to a different USB port on your computer. Make sure your EPSON Stylus CX5200 software is installed correctly. Remove and reinsert paper. Load paper short edge first, against the right side, then slide the edge guide against the paper.
  • Page 8: Any Questions

    Monday–Friday How To Get Paper and Ink For the best prints and copies, use genuine EPSON ink and paper. You can buy them from your local store or from the EPSON Store or www.epsonstore.com (U.S. sales only). In Canada, please call (800) 463-7766 for dealer referral.

Table of Contents