Names Of Lead Wires And Destinations - Eclipse CD8053 Owner's Manual

Mounting instruction
Note
To prevent unconnected leads from shorting out, insulate them
by wrapping their tips with electrical tape. Similarly, insulate the
ends of connected leads.
If an external amplifier is to be connected to the receiver, be
sure to ground its outside housing to the vehicle body (a metal
part).
Names of lead wires and destinations (refer to Page 128)
No. Name
1 ACC
2 B+
3 Ground
4 Antenna power supply Blue
5 Illumination power supply Orange/White
6 Control power supply Blue/White
7 E-LAN terminal
8 Line-out terminals (Front(+)/Hi(+))
9 Line-out terminals (Front(-)/Hi(-))
10 Line-out terminals (Rear(+)/Mid(+))
11 Line-out terminals (Rear(-)/Mid(-))
12 Line-out terminals
(Nonfader(+)/Low(+))
13 Line-out terminals
(Nonfader(-)/Low(-))
14 Cellular phone mute
15 Eclipse Commander terminal
16 Digital out terminals
17 Digital in terminals
18 Line in terminal
Wire color Destination
Red Connect where the power comes on
when the ignition is in the ACC
position.
Yellow Connect where the power is constantly
available, regardless of the ignition
switch's position.
Black Connect where good body grounding
is available.
Connect to the automatic-antenna
control terminal of the vehicle.
Connect to where power comes on
when the headlights are turned on.
Connect to the control terminal for
the external amplifier, etc.
Connect to the E-LAN terminal of the
CD changer, DSP, etc.
Connect to the RCA input connectors
of an external amplifier.
Connect to the RCA input connectors
of a woofer amplifier.
Pink Connect to the ground output terminal
on a mobile phone.
Connect to the Eclipse Commander
module.
Connect to digital terminals of the
Eclipse Commander module.
Connect to digital terminals of the CD
changer.
Connect to the mini plug (φ3.5)
output connector of Portable unit
(MP3 player, MD player, etc.).
126