Cleaning The Print Head Deeply - Canon 2911B002 On-Screen Manual

Cleaning the Print Head Deeply

> Routine Maintenance
Contents
Deeply
Cleaning the Print Head Deeply
If print quality does not improve by the standard cleaning of the Print Head, clean the Print Head deeply.
Cleaning the Print Head deeply consumes more ink than the standard cleaning of the Print Head, so
clean the Print Head deeply only when necessary.
1.
Make sure that the power is turned on.
2.
Clean the Print Head deeply.
(Maintenance) button repeatedly until
(1) Press the
Press the Black or Color button.
(2)
The machine starts cleaning the Print Head deeply.
Do not perform any other operations until the machine completes the deep cleaning of the Print Head. This
takes about 2 minutes.
3.
Check the print head condition.
When the deep cleaning is completed, the LED returns to the standby mode.
To check the print head condition, print the nozzle check pattern. See
If the problem is not resolved, clean the Print Head deeply again.
If the problem is still not resolved, ink may have run out. Replace the FINE Cartridge with a new one. See
Replacing a FINE Cartridge
>
When Printing Becomes Faint or Colors Are Incorrect
.
Advanced Guide Troubleshooting
> Cleaning the Print Head
y appears.
Printing the Nozzle Check Pattern
Page 72 of 623 pages
.
Page top