Intel BLKDG41RQ - Bulk Single Uatx G41 Exp Chip Product Manual page 56

Intel Desktop Board DG41RQ Product Guide
To replace the battery, follow these steps:
1. Observe the precautions in "Before You Begin" (see page 25).
2. Turn off all peripheral devices connected to the computer. Disconnect the
computer's power cord from the AC power source (wall outlet or power adapter).
3. Remove the computer cover.
4. Locate the battery on the board (see Figure 25).
5. Push the battery retention clip aside and remove the battery from the connector as
shown in Figure 25. Note the orientation of the "+" and "-" on the battery.
6. Install the new battery in the connector, making sure to orient the "+" and "-"
correctly.
7. Replace the computer cover.
56
Figure 25. Removing the Battery