Wake-Up Devices And Events - Intel BLKDG41KR Specification

Intel Desktop Board DG41KR Technical Product Specification
1.13.1.2

Wake-up Devices and Events

Table 9 lists the devices or specific events that can wake the computer from specific
states.
Table 9. Wake-up Devices and Events
These devices/events can wake up the computer...
LAN
PME# signal
Power switch
PS/2 devices
RTC alarm
Serial port
USB
WAKE# signal
Notes:
1. For LAN and PME# signal, S5 is disabled by default in the BIOS Setup program. Setting this option to
Power On will enable a wake-up event from LAN in the S5 state.
2. S4 or S5 wake from PS/2 is disabled by default.
NOTE
The use of these wake-up events from an ACPI state requires an operating system
that provides full ACPI support. In addition, software, drivers, and peripherals must
fully support ACPI wake events.
32
...from this state
(Note 1)
S1, S3, S4, S5
(Note 1)
S1, S3, S4, S5
S1, S3, S4, S5
(Note 2)
S1, S3, S4, S5
S1, S3, S4, S5
S1, S3
S1, S3
S1, S3, S4, S5