Table of Contents
Advertisement
Intel Desktop Board DG33TL Product Guide
Loading the Intel Matrix Storage Technology
RAID Drivers and Software
NOTE
If the Desktop Board includes an ITE* IT8211 ATA ATAPI Controller Driver diskette,
and you are using either an IDE/ATA hard disk drive or optical drive or both, refer to
Section 4 if you wish to install the Microsoft Windows XP operating system.
1. Begin Windows Setup by booting from the Windows installation CD.
2. If you will be using Microsoft Windows XP, press <F6> at the beginning of Windows
Setup to install a third-party SCSI or RAID driver. When prompted, insert the
diskette labeled Intel Matrix Storage Technology RAID Driver into a USB floppy
drive. Install the Intel
or
If you will be using Microsoft Windows Vista, follow the setup installation steps until
you reach the section "Where do you want to install Windows?". Click on the "Load
Drivers" option and insert the Intel Express Installer CD/DVD into your optical drive
or insert the diskette labeled Intel Matrix Storage Technology RAID Driver into a
USB floppy drive. Select to install the Intel ICH9 SATA RAID Controller driver.
3. Finish the Windows installation and install all necessary drivers.
4. Install the Intel Matrix Storage Console software via the Intel Express Installer
CD/DVD included with your desktop board or after downloading it from the Internet
at http://support.intel.com/support/motherboards/desktop/. The Intel Matrix
Storage Console software can be used to manage the RAID configuration.
Setting Up a "RAID Ready" System
The Intel Matrix Storage Technology Console software offers the flexibility to upgrade
from a single Serial ATA drive to RAID without reinstalling the operating system, when
a second SATA hard drive is added to the system.
Follow the steps described in the headings from this section: "Configuring the BIOS
for Intel Matrix Storage Technology" and "Loading the Intel Matrix Storage Technology
RAID Drivers and Software".
Once additional SATA drives have been added, open the Intel Matrix Storage
Technology Console Software and follow the directions to update to a RAID setup.
72
®
ICH9 SATA RAID Controller driver.
Hide quick links:
Advertisement
Table of Contents
