Listening To The Tuner - Eclipse CD5415 Owner's Manual

Basic operation
[FM AM] button

Listening to the tuner

1
Press the [FM AM] button.
This will turn the tuner on.
Press the [FM AM] button to switch to the desired FM or
2
AM bands.
Radio bands will switch from FM1 ➔ FM2 ➔ FM3 ➔ AM in
order each time the button is pressed.
Turn the [SEL] button to the left or right to tune to a
3
station.
Turn to the right: Tunes to higher frequencies.
Turn to the left:
Press the [ ] or [ ] button to start the automatic station
4
search.
[ ] button:
[ ] button:
•If stations have been stored in memory, pressing a button
from [1] to [6] will directly select a station. (Refer to the section
ATTENTION
"Manually setting stations into memory" on page 48)
•When an optional HD Radio tuner unit is connected, digital
broadcasts have reception priority. (USA only)
Buttons [1] to [6]
Tunes to lower frequencies.
Starts searching toward higher frequencies.
Starts searching toward lower frequencies
24
[ ] button
[SEL]
button
[ ] button