2.8.1.1
Back Panel Connectors For 8-Channel (7.1) Audio Subsystem
Figure 18 shows the location of the back panel connectors for boards equipped with the 8-channel
(7.1) audio subsystem.
A
M
Figure 18. Back Panel Connectors for 8-Channel (7.1) Audio Subsystem
Table 17 lists the back panel connectors identified in Figure 18.
✏
NOTE
The back panel audio line out connector is designed to power headphones or amplified speakers
only. Poor audio quality occurs if passive (non-amplified) speakers are connected to this output.
Table 17.
Back Panel Connectors Shown in Figure 18
Item/callout
from Figure 18
A
B
C
D
E
F
G
H
I
J
K
L
M
B
L
Description
PS/2 mouse port [Green]
Parallel port [Burgundy]
IEEE-1394a connector (optional)
LAN
Audio line in/Retasking Jack C [Blue]
Front left/right channel audio out/Two channel audio line out/Retasking Jack D
[Lime green]
Mic in/Retasking Jack B [Pink]
Center channel and LFE (subwoofer) audio out/ Retasking Jack G
[Orange]
Surround left/right channel audio out/Retasking Jack H [Black]
USB ports (four)
VGA port [Blue]
Serial port A [Teal]
PS/2 keyboard port [Purple]
C
D
K
J
Technical Reference
E
G
F
I
H
OM17329
61