Audio Subsystem Software; Audio Connectors - Intel BLKD915GMHLK - LGA775 800FSB Dual DDR400 GIG Lan PCI Express mBTX 10 Technical Product Specification

1.10.1 Audio Subsystem Software

Audio software and drivers are available from Intel's World Wide Web site.
For information about
Obtaining audio software and drivers

1.10.2 Audio Connectors

The board contains audio connectors on both the back panel and the component side of the board.
The component-side audio connectors include the following:
•
Front panel audio (a 2 x 5-pin connector that provides mic in and line out signals for front panel
audio connectors)
•
S/PDIF (an optional 1 x 3 connector that provides digital audio signals in S/PDIF format)
•
ATAPI CD-ROM (an optional 1 x 4-pin ATAPI-style connector for connecting an internal
ATAPI CD-ROM drive to the audio mixer)
The functions of the back panel audio connectors are dependent on which subsystem is present.
The 8-channel (7.1) audio subsystem is described in Section 1.10.3; the 6-channel (5.1) audio
subsystem is described in Section 1.10.4.
For information about
The locations of the front panel audio connector, the optional ATAPI CD-ROM
connector, and the optional S/PDIF connector
The signal names of the front panel audio connector
The signal names of the optional S/PDIF connector
The signal names of the optional ATAPI CD-ROM connector
The back panel audio connectors
Product Description
Refer to
Section 1.4, page 17
Refer to
Figure 20, page 64
Table 22, page 66
Table 20, page 65
Table 21, page 65
Section 2.8.1, page 60
31