Error Messages And Beep Codes; Speaker; Bios Beep Code; Bios Error Messages - Intel BLKD101GGCL Specification

Desktop board
Table of Contents

Advertisement

4 Error Messages and Beep Codes

What This Chapter Contains
4.1

Speaker ....................................................................................................................... 69

4.2

BIOS Beep Code.......................................................................................................... 69

4.3

BIOS Error Messages .................................................................................................. 69

4.4
Port 80h POST Codes ................................................................................................. 70
4.1 Speaker
The board-mounted speaker provides audible error code (beep code) information during POST.
For information about
The location of the onboard speaker
4.2 BIOS Beep Code
If a memory error occurs during POST, three long beeps will sound.

4.3 BIOS Error Messages

Table 41 lists the error messages and provides a brief description of each.
Table 41.
BIOS Error Messages
Error Message
CMOS Battery Low
CMOS Checksum error – defaults
loaded
Disk Boot Failure, Insert System Disk
and Press Enter
Explanation
The battery may be losing power. Replace the battery soon.
The CMOS checksum is incorrect. CMOS memory may have
been corrupted. Run Setup to reset values.
System did not find a device to boot.
Refer to
Figure 2, page 12
69

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents