Overview; Feature Summary - Intel BLKD101GGCL Specification

Intel Desktop Board D101GGC Technical Product Specification

1.1 Overview

1.1.1 Feature Summary

Table 1 summarizes the major features of the board.
Table 1.

Feature Summary

Form Factor
Processor
Memory
Chipset
Video
Audio
Legacy I/O Control
USB
Peripheral
Interfaces
LAN Support
BIOS
Expansion
Capabilities
Instantly Available
PC Technology
Hardware Monitor
Subsystem
(controlled by SMSC
SCH5017 I/O
controller)
For information about
Available configurations for the Desktop Board D101GGC
10
microATX (9.60 inches by 8.60 inches [243.84 millimeters by 218.44 millimeters])
Support for the following:
• Intel
® ®
Pentium 4 processor in an LGA775 socket with an 800 or 533 MHz
system bus
• Intel
® ®
Celeron D processor in an LGA775 socket with a 533 MHz system bus
• Two DDR SDRAM Dual Inline Memory Module (DIMM) sockets
• Support for DDR 400 MHz and DDR 333 MHz DIMMs
• Support for up to 2 GB of system memory
• ATI Radeon* Xpress 200 Northbridge
• ATI IXP 450 Southbridge
• 4 Mbit Firmware Hub (FWH)
ATI Radeon Xpress 200 Northbridge
High Definition Audio subsystem using the Realtek ALC861 audio codec
SMSC SCH5017 Legacy I/O controller for hardware management, diskette drive,
serial, parallel, and PS/2* ports
Support for USB 2.0 devices
• Eight USB ports
• One serial port
• One parallel port
• Four Serial ATA interfaces
• Two Parallel ATA IDE interfaces with UDMA 33, ATA-66/100 support
• One diskette drive interface
• PS/2 keyboard and mouse ports
10/100 Mbits/sec LAN subsystem using the Realtek 8101L LAN adapter device
®
AwardBIOS* for Intel resident in the 4 Mbit FWH
• Two PCI Conventional* bus connectors
• One PCI Express* x1 bus add-in card connector
• One PCI Express x16 bus add-in card connector
• Support for PCI Local Bus Specification Revision 2.2
• Support for PCI Express Revision 1.0a
• Suspend to RAM support
• Wake on PCI, RS-232, front panel, PS/2 devices, and USB ports
• Voltage sense to detect out of range power supply voltages
• Thermal sense to detect out of range thermal values
• Three fan connectors
• Three fan sense inputs used to monitor fan activity
• Fan speed control
Refer to
Section 1.2, page 14