Error Messages And Beep Codes; Bios Beep Codes; Front-Panel Power Led Blink Codes - Intel DH61BF Technical Product Specification

Desktop board
Hide thumbs Also See for DH61BF:
Table of Contents

Advertisement

4

Error Messages and Beep Codes

4.1

BIOS Beep Codes

Audible error code (beep code) information during POST is routed to the audio codec
and can be heard through attached speakers. (see Table 30).
Table 30. BIOS Beep Codes
Type
F2 Setup/F10 Boot Menu
Prompt
BIOS update in progress
Video error (no add-in
graphics card installed)
Memory error
Thermal trip warning
4.2

Front-panel Power LED Blink Codes

Whenever a recoverable error occurs during POST, the BIOS causes the board's front
panel power LED to blink an error message describing the problem (see Table 31).
Table 31. Front-panel Power LED Blink Codes
Type
F2 Setup/F10 Boot Menu
Prompt
BIOS update in progress
Video error (no add-in
graphics card installed)
Memory error
Thermal trip warning
Pattern
One 0.5 second beep when BIOS is ready to
accept keyboard input
None
On-off (1.0 second each) two times, then
2.5-second pause (off), entire pattern repeats
(beeps and pause) once and the BIOS will
continue to boot.
On-off (1.0 second each) three times, then
2.5-second pause (off), entire pattern repeats
(beeps and pause) until the system is powered
off.
Alternate high and low beeps (1.0 second each)
for eight beeps, followed by system shut down.
Pattern
None
Off when the update begins, then on for 0.5 seconds,
then off for 0.5 seconds. The pattern repeats until
the BIOS update is complete.
On-off (1.0 second each) two times, then 2.5-second
pause (off), entire pattern repeats (blink and pause)
until the system is powered off.
On-off (1.0 second each) three times, then
2.5-second pause (off), entire pattern repeats (blinks
and pause) until the system is powered off.
Each beep will be accompanied by the following blink
pattern: .25 seconds on, .25 seconds off,
.25 seconds on, .25 seconds off. This will result in a
total of 16 blinks.
Frequency/Comments
932 Hz
932 Hz
For processors requiring an
add-in graphics card
932 Hz
High beep 2000 Hz
Low beep 1500 Hz
Note
For processors requiring
an add-in graphics card
61

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents