ASROCK 775XFire-RAID User Manual page 23

Step 10. Install the VGA card drivers to your system, and restart your computer.
Then you will find "ATI Catalyst Control Center" on your desktop (ATI
Catalyst driver should be version 5.10 or higher).
Step 11. Double-click "ATI Catalyst Control Center". Click "View", and select "Ad-
vanced View". Click "CrossFire
CrossFire " to "Yes".
TM
View
CrossFire TM
If you install one Radeon CrossFire
standard Radeon (CrossFire
not two Radeon CrossFire
above steps. However, although you have selected the option "Enable
CrossFire ", the CrossFire
TM
will automatically reboot. After restarting your computer, please confirm whether
the option "Enable CrossFire
not; if not, please select it again, and then you are able to enjoy the benefit of
CrossFire feature.
TM
Step 12. You can freely enjoy the benefit of CrossFire
appearing here is a registered trademark of ATI Technologies Inc., and is used only
TM
* CrossFire
for identification or explanation and to the owners' benefit, without intent to infringe.
You will find "ATI Catalyst
Control Center" on your
desktop.
", and then set the option "Enable
TM
Enable CrossFire
Edition graphics card and one compatible
TM
Ready) graphics card to this motherboard but
TM
Edition graphics cards, please as well follow the
TM
function can not work actually. Your computer
TM
" in "ATI Catalyst Control Center" is selected or
TM
feature.
TM
2 3 2 3 2 3
2 3 2 3
TM