Receiver - Samsung ME75B User Manual

8
System

8.12.3 Receiver

You can listen to sound through a
To listen to sound through a receiver, go to
Receiver). Then select
If your Receiver
Troubleshooting for Anynet+
Problem
Anynet+ does not work.
I want to start Anynet+.
I want to exit Anynet+.
The message "Connecting to
Anynet+ device..." appears on
the screen.
Receiver (i.e. Home Theater) instead of the product Speaker.
Receiver
Receiver and set to On.
supports audio only, it may not appear in the device list.
Check if the device is an Anynet+ device. The Anynet+ system
supports Anynet+ devices only.
You can connect only one receiver (home theater).
Check if the Anynet+ device power cord is properly connected.
Check the Anynet+ device's Video/Audio/HDMI cable
connections.
Check whether
Anynet+setup menu.
Check whether the remote control is Anynet+ compatible.
If you have removed and then reconnected the HDMI cable,
please make sure to search devices again or turn your product off
and on again.
Check if the Anynet+ function of the Anynet device is set on.
Check if the Anynet+ device is properly connected to the product
and check if the
Anynet+ Setup menu.
Press the TOOLS
a menu you want.
Select View PC
Press the SOURCE
select a non- Anynet+ device.
You cannot use the remote control when you are configuring
Anynet+ or switching to a view mode.
Use the remote control after the product has completed Anynet+
configuration or has finished switching to Anynet+.
screen (System Anynet+ (HDMI-CEC)
Possible Solution
Anynet+ (HDMI-CEC) is set to
Anynet+ (HDMI-CEC) is set to
button to display the Anynet+ menu and select
in the Anynet+ menu.
button on the product remote control and
On in the
On in the
161
8 System