Samsung ME75B User Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. LED TV
  5. ME75B
  6. User manual

Samsung ME75B User Manual

Full hd large format led display
Hide thumbs Also See for ME75B:
Table of Contents

Advertisement

Quick Links

See also: User Manual

User Manual

ME65B
ME75B
The color and the appearance may differ depending on
the product, and the specifications are subject to
change without prior notice to improve the performance.
BN46-00098N-03

Advertisement

Table of Contents
loading

Related Manuals for Samsung ME75B

Summary of Contents for Samsung ME75B

  • Page 1: User Manual

    User Manual ME65B ME75B The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. BN46-00098N-03...

  • Page 2: Table Of Contents

    Table Of Contents BEFORE USING THE Copyright PRODUCT Cleaning Storage Safety Precautions Symbols Electricity and Safety Installation Operation PREPARATIONS Checking the Contents Removing the Packaging Checking the Components Parts Control Panel External sensor KIT (ME65B model only) Reverse Side Remote Control Controlling more than one display product using an external sensor KIT Before Installing the Product (Installation...
  • Page 3 Table Of Contents CONNECTING AND USING Before Connecting A SOURCE DEVICE Pre-connection Checkpoints Connecting and Using a PC Connecting to a PC Changing the Resolution Connecting an External Monitor Connecting to a Video Device Connection Using the AV Cable Connection Using the component Cable Connection Using an HDMI-DVI Cable Connection Using an HDMI Cable Connecting to an Audio System...
  • Page 4 Table Of Contents What is MDC? Connecting to MDC Connection Management Auto Set ID Cloning Command Retry Getting Started with MDC Main Screen Layout Menus Screen Adjustment Sound Adjustment System Setup Tool Settings Other Functions Troubleshooting Guide SCREEN ADJUSTMENT Picture Mode If the input source is PC, DVI or DP If the input source is AV, Component, HDMI Backlight / Contrast / Brightness /...
  • Page 5 Table Of Contents Advanced Settings Black Tone Dynamic Contrast Shadow Detail Gamma Expert Pattern RGB Only Mode Colo(u)r Space White Balance 10p White Balance (Off / On) Flesh Tone Edge Enhancement (Off / On) Motion Lighting (Off / On) LED Motion Plus (Off / On) Picture Options Colo(u)r Tone Colo(u)r Temp.
  • Page 6 Table Of Contents Videos Playing a Video Photos Viewing a Photo (or Slide Show) Music Playing Music Videos / Photos / Music - Additional Functions Sorting the file lists Videos/Photos/Music Play Option menu Source Source Edit Name Information Refresh NETWORK Network Settings Connecting to a Wired Network Wired Network Settings...
  • Page 7 Table Of Contents Time Clock set Sleep Timer On Timer Off Timer Holiday Management Menu Language Eco Solution Energy Saving Eco Sensor (Off / On) No Signal Power Off Auto Power Off (Off / On) Security Safety Lock (Off / On) Button Lock (Off / On) Change PIN Auto Protection Time...
  • Page 8 DivX® Video On Demand Network Remote Control Reset System Reset All SUPPORT Software Upgrade By USB Alternative Software Contact Samsung MAGICINFO LITE File Formats Compatible with MagicInfo Lite Player Video / Audio Network Schedule Connecting to a server MagicInfo Lite Settings...
  • Page 9 Viewing the details of the content that is running Changing the settings for the content that is running TROUBLESHOOTING Requirements Before Contacting Samsung Customer Service Center GUIDE Testing the Product Checking the Resolution and Frequency Check the followings. Q & A...
  • Page 10 Table Of Contents APPENDIX Contact SAMSUNG WORLD WIDE Responsibility for the Pay Service (Cost to Customers) Not a product defect A Product damage caused by customer's fault Others Optimum Picture Quality and Afterimage Burn-in Prevention Optimum Picture Quality Prevention of Afterimage Burn-in Correct Disposal of This Product (Waste Electrical &...

  • Page 11: Before Using The Product

    2012 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. The SAMSUNG and SyncMaster logos are registered trademarks of Samsung Electronics.

  • Page 12: Cleaning

    Before Using the Product Cleaning Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. Take the following steps when cleaning. The following images are for reference only. Real-life situations may differ from what is shown in the images.

  • Page 13: Safety Precautions

    Before Using the Product Safety Precautions Caution RISK OF ELECTRIC SHOCK DO NOT OPEN Caution : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. (OR BACK) THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL. This symbol indicates that high voltage is present inside.

  • Page 14: Electricity And Safety

    Before Using the Product Electricity and Safety The following images are for reference only. Real-life situations may differ from what is shown in the images. Warning Do not use a damaged power cord or plug, or a loose power socket. An electric shock or fire may result.

  • Page 15: Installation

    Do not disconnect the power cord while the product is being used. The product may become damaged by an electric shock. Only use the power cord provided with your product by Samsung. Do not use the power cord with other products.
  • Page 16 Before Using the Product Keep the plastic packaging out of the reach of children. Children may suffocate. Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.) The product may fall and become damaged and/or cause an injury. Using the product in an area with excess vibration may damage the product or cause a fire.

  • Page 17: Operation

    Be sure to consult Samsung Customer Service Center if you want to install the product at such a place. Operation Warning There is a high voltage inside the product.
  • Page 18 (paper, matches, etc) into the product (via the vent or input/output ports, etc). Be sure to power off the product and disconnect the power cord when water or other foreign substances have entered the product. Then contact Samsung Customer Service Center.
  • Page 19 Before Using the Product Caution Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. Activate power-saving mode or a moving-picture screen saver if you will not be using the product for an extended period of time. Disconnect the power cord from the power socket if you do not plan on using the product for an extended period of time (vacation, etc).
  • Page 20 Before Using the Product Exercise caution when adjusting the product angle or stand height. Your hand or finger may get stuck and injured. Tilting the product at an excessive angle may cause the product to fall and an injury may result. Do not place heavy objects on the product.

  • Page 21: Preparations

    Preparations Checking the Contents 1.1.1 Removing the Packaging This image is for reference only. Open the packaging box. Be careful not to damage the product when you open the packaging with a sharp instrument. Remove the black locking device at the bottom of the box. Using the grooves in the box, lift and remove the top of the box.

  • Page 22: Checking The Components

    Preparations 1.1.2 Checking the Components Contact the vendor where you purchased the product if any components are missing. The appearance of the components and items sold separately may differ from the image shown. Components Components may differ in different locations. Warranty card Quick setup guide User manual...
  • Page 23 Preparations Items sold separately The stand is not supplied. The following items can be purchased at your nearest retailer. Wall-mount Kit RS232C-stereo cable DVI cable HDMI-DVI Cable HDMI cable DP cable RCA stereo cable Video cable LAN cable Stereo cable Component cable RCA cable Network Box...

  • Page 24: Parts

    Preparations Parts 1.2.1 Control Panel Panel Key Remote Control Sensor / Power indicator (ME75B model only) Panel Key Sensor Description Power on the product. If you press the [ ] button when the product is turned on, the control menu will be displayed. To exit the OSD menu, press and hold the panel key for at least one second.
  • Page 25 Preparations Control menu If you press the [ ] button on the panel key ("1.2 Parts") when the product is turned on, the control menu will be displayed. Return Icons Description Select the connected input source. Move the panel key right to select ] in the control menu.

  • Page 26: External Sensor Kit (Me65B Model Only)

    Preparations 1.2.2 External sensor KIT (ME65B model only) The External sensor KIT has a remote-control sensor, a brightness sensor and function keys. If mounting the display onto a wall, you can move the External sensor KIT to the side of the display. The color and shape of parts may differ from what is shown.
  • Page 27 Preparations Attaching the External sensor KIT to the side (ME65B model only) This External sensor KIT can be attached to any part of the display using the double-sided tape provided with the sensor. The External sensor KIT can also be attached to a wall near the display. Do not attach the External sensor KIT to the display if the display does not have plastic or metal sides.

  • Page 28: Reverse Side

    Preparations 1.2.3 Reverse Side The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. IR / AMBIENT SENSOR IN IR OUT AUDIO RGB / DVI / HDMI AUDIO IN POWER DP IN HDMI IN...
  • Page 29 Preparations Assembling the Holder-Wire stand (ME65B model only) * Stand : Sold separately 1 Preparations...

  • Page 30: Remote Control

    Preparations 1.2.4 Remote Control Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled. Remote control button functions may differ for different products. Power on the product. Power off the product.
  • Page 31 Preparations Adjusting the OSD with the Remote Control Open the OSD menu. Select from Picture, Sound, Media, Network, System Support in the displayed OSD menu screen. Change settings as desired. Finish setting. Close the onscreen display (OSD) menu. To place batteries in the remote control 1 Preparations...
  • Page 32 Preparations Remote Control Reception Range ME65B ME75B Use the remote control within 7m to 10m from the sensor on the product at an angle of 30 from the left and right. Store used batteries out of reach of children and recycle. Do not use a new and used battery together.

  • Page 33: Controlling More Than One Display Product Using An External Sensor Kit

    Preparations 1.2.5 Controlling more than one display product using an external sensor KIT AMBIENT AMBIENT SENSOR IN SENSOR IN IR OUT IR OUT Connect the [IR OUT] port on the product to the [IR / AMBIENT SENSOR IN] port on the other display product using the stereo cable.

  • Page 34: Before Installing The Product (Installation Guide)

    Otherwise, it may fall and cause personal injury. Make sure to install the specified wall mount. 1.3.1 Tilting Angle and Rotation Contact Samsung Customer Service Center for further details. 15 Û The product can be tilted at a maximum angle of 15 from a perpendicular wall surface.

  • Page 35: Ventilation

    Preparations 1.3.2 Ventilation 1. Installation on a Perpendicular Wall Minimum 40 mm Ambient temperature: Under 35 C When installing the product on a perpendicular wall, allow at least 40 mm of space between the product and wall surface for ventilation and ensure that the ambient temperature is kept below 35 C.
  • Page 36 Preparations 2. Installation on an Indented Wall Contact Samsung Customer Service Center for further details. Figure 1.3 Top view Plane view Minimum 40 mm Minimum 70 mm Minimum 50 mm Minimum 50 mm Ambient temperature: Under 35 C Figure 1.2 Side view When installing the product on an indented wall, allow at least the space specified above between the product and wall for ventilation and ensure that the ambient temperature is kept below 35 C.

  • Page 37: Dimensions

    Preparations 1.3.3 Dimensions Unit: mm (inches) SET - Dimension (W x D x H) [mm] Without STAND Model name 1480.5 1437.5 812.5 855.5 32.2 ME65B (58.29) (56.59) (32.00) (33.68) (1.27) 1678.2 1653.2 931.3 958.7 49.9 ME75B (66.07) (65.09) (36.67) (37.74) (1.96) All drawings are not necessarily to scale.

  • Page 38: Installing The Wall Mount

    We recommend you contact a technician for assistance when installing the wall mount bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the wall mount on your own.
  • Page 39 Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents. Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions.

  • Page 40: Remote Control

    Preparations Remote Control 1.5.1 Cable Connection RS232C Cable Interface RS232C (9 pins) TxD (No. 2), RxD (No. 3), GND (No. 5) Bit rate 9600 bps Data bits 8 bit Parity None Stop bit 1 bit Flow control None Maximum length 15m (only shielded type) Pin assignment 1 2 3 4 5...
  • Page 41 Preparations RS232C cable Connector: 9-Pin D-Sub Cable : Cross Cable -P2- STEREO PLUG (3.5ø) -P1- -P1- -P2- -P2- --------> STEREO Female <-------- PLUG (3.5ø) --------- LAN Cable Pin assignment 1 2 3 4 5 6 7 8 Pin No Standard Color Signal White and orange Orange...
  • Page 42 Preparations Connector : RJ45 Direct LAN cable (PC to HUB) RJ45 MDC RJ45 MDC Signal Signal <--------> <--------> <--------> <--------> Cross LAN cable (PC to PC) RJ45 MDC Signal Signal <--------> <--------> <--------> <--------> 1 Preparations...

  • Page 43: Connection

    Preparations 1.5.2 Connection Connection 1 RS232C RS232C RS232C RS232C Connection 2 RJ45 RJ45 1 Preparations...
  • Page 44 Preparations Connection 3 RJ45 RS232C RS232C RS232C RS232C 1 Preparations...

  • Page 45: Control Codes

    Preparations 1.5.3 Control Codes Viewing control state (Get control command) Header Command Data length Checksum Command 0xAA type Controlling (Set control command) Header Command Data length Data Checksum Command 0xAA Value type Command Command type Command Value range Power control 0x11 Volume control 0x12...
  • Page 46 Preparations E.g. Power On & ID=0 Header Command Data length Data 1 Checksum 0xAA 0x11 "Power" Header Command Data length Data 1 0xAA 0x11 To control all devices connected by a serial cable simultaneously irrespective of IDs, set the ID as "0xFE"...
  • Page 47 Preparations Volume control Function The volume of a product can be adjusted using a PC. Viewing volume state (Get Volume Status) Header Command Data length Checksum 0xAA 0x12 Setting the volume (Set Volume) Header Command Data length Data Checksum 0xAA 0x12 "Volume"...
  • Page 48 Preparations Input source control Function The input source of a product can be changed using a PC. Viewing input source state (Get Input Source Status) Header Command Data length Checksum 0xAA 0x14 Setting the input source (Set Input Source) Header Command Data length Data...
  • Page 49 Preparations Header Command Data length Ack/Nak r-CMD Val1 Checksum "Input 0xAA 0xFF ‘A’ 0x14 Source" "Input Source": An input source code to be set on a product. Header Command Data length Ack/Nak r-CMD Val1 Checksum 0xAA 0xFF ‘N’ 0x14 "ERR" "ERR"...
  • Page 50 Preparations Header Command Data length Ack/Nak r-CMD Val1 Checksum "Screen 0xAA 0xFF ‘A’ 0x18 Mode" "Screen Mode": A code that sets the product status. Header Command Data length Ack/Nak r-CMD Val1 Checksum 0xAA 0xFF ‘N’ 0x18 "ERR" "ERR" : A code showing what error has occurred. Screen size control Function The screen size of a product can be changed using a PC.
  • Page 51 Preparations PIP On/Off control Function The PIP mode of a product can be turned on or off using a PC. Only available on models that have the PIP function. The mode cannot be controlled if Video Wall is set to On. This function is not available in MagicInfo.
  • Page 52 Preparations Auto adjustment control (PC and BNC only) Function Automatically adjust the PC system screen using a PC. Viewing auto adjustment state (Get Auto Adjustment Status) None Setting auto adjustment (Set Auto Adjustment) Header Command Data length Data Checksum "Auto 0xAA 0x3D Adjustment"...
  • Page 53 Preparations Video Wall Mode Control Function Video Wall Mode can be activated on a product using a PC. This control is only available on a product whose Video Wall is enabled. This function is not available in MagicInfo. Viewing video wall mode (Get Video Wall Mode) Header Command Data length...
  • Page 54 Preparations Safety Lock Function PC can be used to turn the Safety Lock function on or off on a product. This control is available regardless of whether or not the power is turned on. Viewing the safety lock state (Get Safety Lock Status) Header Command Data length...

  • Page 55: Connecting And Usinga Source Device

    Connecting and Using a Source Device Before Connecting Check the following before you connect this product with other devices. Devices that can be connected to this product include PCs, camcorders, speakers, set top boxes and DVD/Blu-ray Disc players. Audio 2.1.1 Pre-connection Checkpoints Before connecting a source device, read the user manual provided with it.

  • Page 56: Connecting And Using A Pc

    Connecting and Using a Source Device Connecting and Using a PC 2.2.1 Connecting to a PC Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. A PC can be connected to the product in a variety of ways. Select a connection method suitable for your PC.
  • Page 57 Connecting and Using a Source Device Connection Using an HDMI-DVI Cable HDMI IN RGB / DVI / HDMI AUDIO IN When you connect a PC to the product using an HDMI-DVI cable, set Edit Name DVI PC to access video and audio content stored on the PC. Connection Using an HDMI Cable HDMI IN 2 Connecting and Using a Source Device...
  • Page 58 Connecting and Using a Source Device Connection Using an DP Cable DP IN 2 Connecting and Using a Source Device...

  • Page 59: Changing The Resolution

    Connecting and Using a Source Device 2.2.2 Changing the Resolution Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality. The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected. Changing the Resolution on Windows XP Go to Control Panel Display...
  • Page 60 Connecting and Using a Source Device Changing the Resolution on Windows 7 Go to Control Panel Display Screen Resolution, and change the resolution. **** **** 2 Connecting and Using a Source Device...

  • Page 61: Connecting An External Monitor

    Connecting and Using a Source Device Connecting an External Monitor DVI OUT (LOOPOUT) AUDIO OUT The following images are for reference only. Real-life situations may differ from what is shown in the images. The Loopout function can be used to duplicate the screen of the primary display. Connect [DVI OUT] on the primary display to [DVI IN] or [HDMI] on another display.

  • Page 62: Connecting To A Video Device

    Connecting and Using a Source Device Connecting to a Video Device Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. You can connect a video device to the product using a cable. Connecting parts may differ in different products.

  • Page 63: Connection Using An Hdmi-Dvi Cable

    Connecting and Using a Source Device 2.4.3 Connection Using an HDMI-DVI Cable HDMI IN RGB / DVI / HDMI AUDIO IN Audio will not be enabled if the product is connected to a video device using an HDMI-DVI cable. To resolve this, additionally connect an audio cable to the audio ports on the product and video device.

  • Page 64: Connecting To An Audio System

    Connecting and Using a Source Device Be sure to use an HDMI cable with a thickness of 1.4 cm or less. Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may occur. A basic high-speed HDMI cable or one with ethernet is recommended.

  • Page 65: Connecting The Network Box (Sold Separately)

    Connecting and Using a Source Device Connecting the network box (Sold separately) 2.5.1 MagicInfo To use MagicInfo, a network box (sold separately) must be connected to the product. For details on how to connect to a network box, refer to the user's manual provided with the network box upon purchase.

  • Page 66: Magicinfo

    Connecting and Using a Source Device Entering MagicInfo mode After installing and connecting the network box (sold separately) to the product, power on the product. Press SOURCE on the remote control, and select MagicInfo. Connecting the network box to the HDMI port on the product will change Source from HDMI...
  • Page 67 Connecting and Using a Source Device Enter the IP information. MagicInfo Setup Wizard - v.1.12 Select TCP/IP - step 2 Obtain an IP address automatically Use the following IP address: IP address: 192 . 168 . 0 . 102 Subnet mask: 255 .
  • Page 68 Connecting and Using a Source Device Select a display mode. MagicInfo Setup Wizard - v.1.12 Select Screen Type - step 4 Landscape Portrait < Back(B) Next(N) > Finish Cancel Double-check the settings you have just configured. MagicInfo Setup Wizard - v.1.12 Setup Information 1.

  • Page 69: Plug In Module

    2.5.2 Plug In Module To use Plug In Module, make sure you connect a Samsung PIM (sold separately). To connect a device made by another manufacturer, ensure the device is compatible with Open Pluggable Specification (OPS) standards. For details on how to connect a device, refer to the user manual provided with the PIM upon purchase.

  • Page 70: Changing The Input Source

    Connecting and Using a Source Device Changing the Input source 2.6.1 Source MENU Media Source ENTER Source allows you to select a variety of sources and change source device names. Source You can display the screen of a source device connected to the product. Select a source from source list to display the screen of the selected source.

  • Page 71: Using Mdc

    Using MDC MDC (Multiple Display Control) is an application that allows you to easily control multiple display devices simultaneously using a PC. Configuring Settings for Multi Control MENU System Multi Control ENTER Assign an individual ID to your product. 3.1.1 Configuring settings for Multi Control MDC Connection Selects a port to receive the inputs from.

  • Page 72: Mdc Program Installation/Uninstallation

    Using MDC MDC Program Installation/Uninstallation 3.2.1 Installation Insert the installation CD into the CD-ROM drive. Click the MDC Unified installation program. If a software installation window is not displayed on the main screen, install with the "MDC Unified" execution file in the MDC folder on the CD. Select a language for installation.

  • Page 73: What Is Mdc

    Using MDC What is MDC? Multiple display control (MDC) is an application that allows you to easily control multiple display devices simultaneously using a PC. 3.3.1 Connecting to MDC Using MDC via RS-232C (serial data communications standards) An RS-232C serial cable must be connected to the serial ports on the PC and monitor. RS232C IN/OUT 3 Using MDC...
  • Page 74 Using MDC Using MDC via Ethernet Enter the IP for the primary display device and connect the device to the PC. One display device can connect to another using an RS-232C serial cable. Communicate with LAN cable RJ45 Multiple products can be connected using the [RJ45] port on the product and the LAN ports on the HUB.

  • Page 75: Connection Management

    Using MDC 3.3.2 Connection Management Connection management includes the Connection list and Connection list modification options. Connection list – Connection list shows the details of the connections such as connection setting (IP/ COM, Port No, MAC, and Connection Type), connection status, Set ID Range, and detected devices. Each connection can contain a maximum of 100 devices connected in serial daisy-chain fashion.

  • Page 76: Auto Set Id

    Using MDC 3.3.3 Auto Set ID Auto Set ID feature assigns a Set ID for all the LFDs connected in daisy-chain of a selected connection. There can be a maximum of 100 LFDs in a connection. The Set ID is assigned sequentially in the daisy- chain running from 1 to 99, and then finally to Set ID 0.

  • Page 77: Cloning

    Using MDC 3.3.4 Cloning Using the Cloning feature, you can copy the setting of one LFD and apply it to multiple selected LFDs. You can select specific tab categories or all tab categories for cloning, using the copy setting option window.

  • Page 78: Command Retry

    Using MDC 3.3.5 Command Retry This feature is used to specify the maximum number of times the MDC command will be retried in case of there being no reply or a corrupted reply from an LFD. The retry count value can be set using the MDC options window.

  • Page 79: Getting Started With Mdc

    Using MDC 3.3.6 Getting Started with MDC To start the program, click Start Programs Samsung MDC Unified. Click Add to add a display device. If the connection is established via RS232C, go to Serial and specify the COM Port. 3 Using MDC...
  • Page 80 Using MDC If the connection is established via Ethernet, enter the IP that was entered for the display device. 3 Using MDC...

  • Page 81: Main Screen Layout

    Using MDC 3.3.7 Main Screen Layout Change the status of a display device or the properties of the program. Menu Bar View a list of connected display devices or device groups. Device Category View a list of schedules for display devices. Schedule Category Select the display device you want to adjust.

  • Page 82: Menus

    Using MDC 3.3.8 Menus You can power on or off a selected device or change the input source or volume of the device. Choose display devices from the list of sets, and select the Home tab. Home Select an item and change the corresponding setting. Power On: Power on a selected display.

  • Page 83: Screen Adjustment

    Using MDC Alert Fault Device This menu shows a list of display devices which have following errors - fan error, temperature error, brightness sensor error, or lamp error. Select a display device from the list. The Repair button will be enabled. Click the refresh button to refresh the error status of the display device.
  • Page 84 Using MDC Tint (G/R) Adjust the tint for the selected display device. Color Tone Adjust the background color tone for the selected display device. Color Temp Adjust the color temperature for the selected display device. This option is enabled if Color Tone is set to Off. Customize the intensity of red color for the selected display device.
  • Page 85 Using MDC Custom: Customize the level of screen burn-in or flickering. Demo: This function demonstrates the technology of Auto Motion Plus. The result when the mode is changed can be previewed on the left side of the window. Brightness Sensor Enable or disable the Brightness Sensor for the selected display device.

  • Page 86: Sound Adjustment

    Using MDC 3.3.10 Sound Adjustment You can change the sound settings. Choose display devices from the list of sets, and select the Sound tab. The Bass or Treble item will be disabled if the item is not supported by the selected set. Bass Adjust the bass for the selected display.

  • Page 87: System Setup

    Using MDC 3.3.11 System Setup Choose display devices from the list of sets, and select the System tab. Video Wall The Video Wall function can be used to display part of a whole picture or repeat the same picture on each of connected multiple display devices.
  • Page 88 Using MDC Select the number of horizontal display devices. A maximum of 15 displays can be arranged in a row. A maximum of 6 can be assigned to V if 15 is assigned to H. Select the number of vertical display devices. A maximum of 15 displays can be arranged in a row.
  • Page 89 Using MDC Basic information required to adjust PIP will appear in the menu screen. PIP will be disabled when Video Wall is ON. Note that Picture Size is disabled when PIP is ON. PIP Size View the PIP Size of the current display. PIP Source Select a PIP input source.
  • Page 90 Using MDC General User Auto Color Automatically adjust the screen colors. Available only in PC mode. Auto Power Set the product to automatically power on. Standby Control Set the standby mode to activate if an input source is not detected. Fan &...
  • Page 91 Using MDC Security Safety Lock Lock the on-screen menus. To unlock the menus, set Safety Lock to Off. Button Lock Lock the buttons on the display device. To unlock the buttons, set Button Lock to Off. OSD Display Source OSD Select whether to display a message when the Source is changed.
  • Page 92 Using MDC Time Clock Set Change the current time on the selected display device according to the time set on a PC. If the time is not set on the display device, null values will be displayed. Timer On Time: Set the time to power on the selected display device. Off Time: Set the time to power off the selected display device.
  • Page 93 Using MDC Once: Activate the timer only one time. EveryDay: Activate the timer every day. Mon~Fri: Activate the timer from Monday through Friday. Mon~Sat: Activate the timer from Monday through Saturday. Sat~Sun: Activate the timer on Saturdays and Sundays. Manual: Customize days of the week. The checkboxes to select days of the week below Repeat are enabled only if Manual is selected.
  • Page 94 Using MDC Screen Burn Protection Pixel Shift Move the screen slightly at specified time intervals to prevent screen burn-in. Screen Saver This function prevents screen burn-in when the screen of the selected display device is left idle for an extended period of time. Interval: Set the interval to activate the Screen Saver.

  • Page 95: Tool Settings

    Using MDC The Safety Screen function can be used to prevent screen burn-in when a stationary image displays on the screen of a display device for an extended period of time. Lamp Control Lamp Control is used to adjust the backlight to reduce power consumption. Automatically adjust the backlight of the selected display device at a specified time.
  • Page 96 Using MDC Reset Reset Picture Reset the screen settings. Reset Sound Reset the sound settings. Reset System Reset the system settings. Reset All Reset the screen, sound and system settings at the same time. Edit Column Select the items you want to display in the list of sets. Information View the program information.

  • Page 97: Other Functions

    Using MDC 3.3.13 Other Functions Resizing a Window Place the mouse pointer on a corner of the program window. An arrow will appear. Move the arrow to customize the size of the program window. 3 Using MDC...
  • Page 98 Using MDC Group Management Creating Groups Create groups and manage the list of sets on a group basis. Duplicate group names cannot be used. Right-click and select Group>Edit in the display device list section on the left side of the program window.
  • Page 99 Using MDC The Add on the same level button is enabled only if at least one group is created. Enter the group name. Deleting Groups Select a group name, and click Edit. In the Edit Group window displayed, click Delete. Click Yes.
  • Page 100 Using MDC Schedule Management Creating Schedules Create and register a schedule on a group basis. Click All Schedule List in the schedule section on the left side of the program window. The Add button will be enabled in the middle. Click the Add button.
  • Page 101 Using MDC Click Add below the Device Group item, and select the group you want to add a schedule to. Select Date&Time/Action and click OK. The schedule will be added and a list of schedules will appear in the set list window. Device Group: Select a group.

  • Page 102: Troubleshooting Guide

    Using MDC 3.3.14 Troubleshooting Guide Issue Solution The display you want to control Check the connection of the RS232C cable (check that the does not appear on the system cable is properly connected to appropriate serial port). information chart. Check that another display with a duplicate ID is not connected.
  • Page 103 Using MDC How display properties are shown when multiple displays are used When no display is selected: The default value is displayed. When one display is selected: Settings for the selected display are displayed. When two displays are selected (e.g. in sequence of ID 1 andID 3): The settings for ID 1 are displayed before the settings for ID 3.

  • Page 104: Screen Adjustment

    Standard: This mode is generally suitable for any environment. Natural: Suitable for reducing eye strain. Movie: This mode reduces eye fatigue. Wise: Provides the optimal picture quality for Samsung DVD, Blu-ray and Home Theater products which support Wise. When BD Wise is turned On, the picture mode is automatically changed to the optimal resolution.

  • Page 105: Backlight / Contrast / Brightness / Sharpness / Colo(U)R / Tint(G/R)

    Screen Adjustment Backlight / Contrast / Brightness / Sharpness / Colo(u)r / Tint(G/R) MENU Picture ENTER Your product has several options for adjusting picture quality. Select an option using the buttons, and then press [ ]. Use the arrow keys to adjust the option value or select an option setting. When done, press [ When you make changes to Backlight, Contrast, Brightness, Sharpness, Colo(u)r...

  • Page 106: Picture Size

    Screen Adjustment 4.3.1 Picture Size If you have a cable box or satellite receiver, it may have its own set of screen sizes as well. However, we highly recommend you use your product 16:9 mode most of the time. 16:9: Sets the picture to 16:9 wide mode. Zoom1: Use for moderate magnification.

  • Page 107: Position

    Screen Adjustment 4.3.2 Position Adjusts the picture position. Position is only available if Picture Size is set to Zoom1, Zoom2, Wide Fit, Screen fit or Custom. To use the Position function after selecting Zoom1, Zoom2 Wide Fit, follow these steps. Press the button to select Position.

  • Page 108: Resolution Select

    4.5.1 3D Mode This exciting new feature enables you to view 3D content. In order to fully enjoy this feature, you must purchase a pair of Samsung 3D Active Glasses to view 3D video. 4.5.2 Viewing product Using the 3D function IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES.
  • Page 109 Screen Adjustment A responsible adult should frequently check on children who are using the 3D function. If there are any reports of tired eyes, headaches, dizziness, or nausea, have the child stop viewing 3D product and rest. Do not use the 3D Active Glasses for other purposes (such as general eyeglasses, sunglasses, protective goggles, etc.) Do not use the 3D function or 3D Active Glasses while walking or moving around.
  • Page 110 Screen Adjustment Depth (1~10): Adjust the overall depth. L/R Change (L/R Image Image): Swap the left and right pictures. 2D (Off / On): Displays the image for the left eye only. This function is deactivated when 3D Mode set to “2D 3D”...
  • Page 111 3D Active Glasses from Samsung’s previous product (IR type) or other manufacturers not be supported. When the product is initially powered on, may take some time until the 3D display is optimized. The 3D Active Glasses may not work properly if there is any other 3D product or electronic devices turned on near the glasses or product.

  • Page 112: Advanced Settings

    Screen Adjustment Advanced Settings MENU Picture Advanced Settings ENTER Advanced Settings are available in the Standard Movie modes. To use, select an option using the up and down arrow keys, and then press . Use the arrow keys to change the value or setting, and then press mode, you can only make changes to Gamma...

  • Page 113: Gamma

    Screen Adjustment 4.6.4 Gamma Adjust the primary color intensity. 4.6.5 Expert Pattern Use the Expert Pattern function to calibrate the picture. If the OSD menu disappears or a menu other than the Picture menu is opened, the product saves the calibration and the Expert Pattern screen disappears.

  • Page 114: White Balance (Off / On)

    Screen Adjustment 4.6.9 10p White Balance (Off / On) Controls the white balance in 10 point interval by adjusting the red, green, and blue brightness. Interval: Select interval to adjust. Red: Adjust the red level. Green: Adjust the green level. Blue: Adjust the blue level.

  • Page 115: Picture Options

    Screen Adjustment Picture Options MENU Picture Picture Options ENTER Select an option using the up and down arrow keys, and the press [ ]. Use the arrow keys to change the setting, and then press [ When connecting a PC, you can only make changes to the Colo(u)r Tone.

  • Page 116: Digital Noise Filter

    Screen Adjustment 4.7.3 Digital Noise Filter If the broadcast signal received by your product is weak, you can activate the Digital Noise Filter feature to reduce any static and ghosting that may appear on the screen. Medium High Auto When the signal is weak, try all the options until the the product displays the best picture. 4.7.4 MPEG Noise Filter Reduces MPEG noise to provide improved picture quality.

  • Page 117: Auto Motion Plus (Or Motion Plus)

    Screen Adjustment 4.7.7 Auto Motion Plus (or Motion Plus) Removes blur and judder from scenes with larger amounts of rapid movement to provide a clearer picture. The menu names may vary depending on the country. This feature can be used to view fast moving scenes. Off: Switches Auto Motion Plus Motion...

  • Page 118: Sound Adjustment

    Sound Adjustment Configure the sound (Sound) settings for the product. Sound Mode MENU Sound Sound Mode ENTER Use the up and down arrow keys to select an option, and then press [ Sound Sound Mode Standard Sound Effect 3D Audio Speaker Settings Reset Sound The displayed image may differ depending on the model.

  • Page 119: Sound Effect

    Sound Adjustment Sound Effect MENU Sound Sound Effect ENTER Speaker Select is set to External, Sound Effect is disabled. Available only when Sound Mode is set to Standard. SRS TruSurround HD (Off / On) This function provides a virtual 5.1 channel surround sound experience through a pair of speakers using HRTF(Head Related Transfer Function) technology.

  • Page 120: Speaker Settings

    Sound Adjustment Speaker Settings MENU Sound Speaker Settings ENTER Speaker Select (External / Internal) If you are listening to the sound track of a broadcast or movie through an external receiver, you may hear a sound echo caused by the difference in decoding speed between the product speakers and the speakers attached to your audio receiver.

  • Page 121: Media

    Media MagicInfo Lite MENU Media MagicInfo Lite ENTER[ Press the MagicInfo Lite button on the remote control. 6.1.1 MagicInfo Lite Player Guide MagicInfo Lite Player allows you to play content (image, video, document files) at a desired time. You can play content saved in internal memory or USB memory. You can also play content via MagicInfo Lite Server after connecting to a network.

  • Page 122: Videos

    Media Videos MENU Media Videos ENTER[ Connecting a USB Device Turn on your product. Connect a USB device containing photo, music and/or movie files to the USB port on the back or side panel of the product. When a USB device is connected to the product, the Connected Device screen appears.
  • Page 123 Media Supported Video Formats File Frame Bit rate Audio Container Video Codec Resolution Extension rate(fps) (Mbps) Codec DivX 3.11 / 4.x / MP3 / AC3/ 1920x1080 6 ~ 30 5.1 / 6.0 *.avi LPCM / *.mkv MPEG4 SP / ASP 1920x1080 6 ~ 30 ADPCM /...
  • Page 124 Media Video content can not be played, if there are many contents in one file. When you play video over a network connection, the video may not be played smoothly. The menu may take longer to appear if the video’s bit rate exceeds 10Mbps. Some USB/digital camera devices may not be compatible with the player.

  • Page 125: Photos

    Media Photos MENU Media Photos ENTER[ Connecting a USB Device Turn on your product. Connect a USB device containing photo, music and/or movie files to the USB port on the back or side panel of the product. When a USB device is connected to the product, the Connected Device screen appears.

  • Page 126: Music

    Media Music MENU Media Music ENTER[ Connecting a USB Device Turn on your product. Connect a USB device containing photo, music and/or movie files to the USB port on the back or side panel of the product. When a USB device is connected to the product, the Connected Device screen appears.
  • Page 127 Media Playing My Playlist Select the My Playlist folder and it will play automatically. Press the button to play a different music file within the play list. To delete a file from Playlist, select the recycle bin icon next to the file you want to delete by using the direction buttons, and then press [ ].

  • Page 128: Videos / Photos / Music - Additional Functions

    Media Videos / Photos / Music - Additional Functions 6.5.1 Sorting the file lists To sort files in the file lists, select the (Sorting) icon in the top right of the screen by using the button. Then, press the [ ] button.

  • Page 129: Videos/Photos/Music Play Option Menu

    Media 6.5.2 Videos/Photos/Music Play Option menu When playing video or photo files, you can press the TOOLS button to display an Options menu. Below are a series of tables listing the options available and the media each option applies to. Option Name Operations Videos...
  • Page 130 Media Option Name Operations Videos Photos Music You can start or stop a slide show. Start Slide Show Stop Slide Alternatively, use the button on the Show remote. You can select the slide show speed during Slide Show the slide show. Alternatively, use the Speed button on the remote.

  • Page 131: Source

    Media Source MENU Media Source ENTER[ Source allows you to select a variety of sources and change source device names. 6.6.1 Source You can display the screen of a source device connected to the product. Select a source from Source List to display the screen of the selected source.

  • Page 132: Edit Name

    Media 6.6.2 Edit Name MENU Media Source TOOLS Edit Name ENTER[ You can rename a connected source device. Sometimes the screen will not display properly unless the name of a source device is specified in Edit Name. In addition, it is best to rename the source device in Edit Name to obtain optimal picture quality.

  • Page 133: Network

    Network Network Settings 7.1.1 Connecting to a Wired Network There are three ways to attach your product to your LAN using cable: You can attach your product to your LAN by connecting the LAN port on the back of your product to an external modem using a LAN cable.

  • Page 134: Wired Network Settings

    Network access the Internet so you do not have to enter them manually. Most home networks are Dynamic Networks. Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address, subnet mask, gateway, and DNS values manually on your product Cable Setup Screen when you set up the network connection.
  • Page 135 Network Manual Network Setup Use the Manual Network Setup when connecting your product to a network that requires a Static IP address. Getting the Network Connection Values To view the Network connection values on most Windows computers, follow these steps. Right click the Network icon on the bottom right of the screen.

  • Page 136: Connecting To A Wireless Network

    Network 7.1.3 Connecting to a Wireless Network To connect your product to your wireless network, you need a wireless router or modem and a Samsung Wireless LAN adapter (WIS10ABGN, WIS12ABGNX), which you connect to your product back or side panel USB port. See the illustration below.

  • Page 137: Wireless Network Setting

    WPS (PBC) One Foot Connection The product may not recognize the Samsung Wireless LAN adapter if you connect it to the product with a USB hub or USB extension cable other than the cable supplied with the product. 7.1.4 Wireless Network Setting...
  • Page 138 Network When done, use the right arrow button to move the cursor to Next, and then press [ The network connection screen appears and the verification process starts. When the connection has been verified, the “Internet is connected successfully.” message appears. If the network does not accept the Security key (Security key or PIN), select...

  • Page 139: Wps(Pbc)

    Network When done, use the button to move the cursor to Next, and then press the [ ] button. The network connection screen appears and the verification process starts. Press [ ] to cancel. Select IP Settings on the network connection screen. The IP Settings screen appears.

  • Page 140: One Foot Connection

    This Priority QOS function is unique to Samsung wireless routers. You can connect a Samsung wireless router to many devices, such as laptops, mobile phones, BD players etc. But, when you connect a Samsung product to a Samsung wireless router, the Samsung wireless router gives the Samsung product a priority connection.

  • Page 141: Ad Hoc Network Setup

    Network 7.1.7 Ad Hoc Network Setup You can connect to a mobile device supporting Ad-hoc connections without a wireless router or AP through the product. How to set up using Ad hoc Go to Network Settings screen. Select Wireless (General), and press [ ], then press [ ] again.

  • Page 142: Magicinfo Lite Settings

    Network MagicInfo Lite Settings MENU Network MagicInfo Lite Settings ENTER[ Server Setting the MagicInfo Lite server IP Enter the server IP address and port number. Use 7001 as the port number. If unable to connect to the server using port number 7001, check with your server administrator to find the correct port number and then change the port number.

  • Page 143: System

    System Multi Control MENU System Multi Control ENTER Assign an individual ID to your product. 8.1.1 Configuring settings for Multi Control MDC Connection Select a method to connect to MDC to receive the MDC signal. RS232C MDC Communicate with MDC via the RS232C-stereo cable. RJ45 MDC Communicate with MDC via the RJ45 cable.

  • Page 144: Time

    System Time MENU System Time ENTER You can configure Clock Set Sleep Timer. You can also set the product to automatically turn on or off at a specified time using the Timer function. 8.2.1 Clock set Set the clock to use the various various timer features of the product. Changing the Setting for Clock Clock Set Set the...

  • Page 145: On Timer

    System 8.2.3 On Timer On Timer so that your product turns on automatically at a time and on a day of your choosing. Timer: You can set up three separate On Timer configurations. (On Timer On Timer Timer You must set the clock before you can use Timer.

  • Page 146: Holiday Management

    System 8.2.5 Holiday Management Timer will be disabled during a period specified as a holiday. Setting Holiday Management Add: Specify the period you want to add as a holiday. Select the start and end dates of the holiday you want to add using the buttons, and click Save button.

  • Page 147: Eco Solution

    System Eco Solution MENU System Eco Solution ENTER The displayed image may differ depending on the model. 8.4.1 Energy Saving Save power with the Energy Saving feature. While Energy Saving mode is active, the product power consumption will be controlled to save power. Medium High Picture Off...

  • Page 148: Auto Power Off (Off / On)

    System 8.4.4 Auto Power Off (Off / On) The product will automatically turn off if you don’t press a button on the remote or touch a button on product front panel within 4 hours to prevent overheating. Security MENU System Security ENTER Every time you access the Security functions, the PIN screen will appear and the default PIN number is...

  • Page 149: Pip

    System MENU System ENTER If you have set mode in (Picture-in-Picture), you cannot adjust the Picture Size. For PIP sound, refer to the Sound Select instructions. If you turn the product off while watching in the PIP mode, the PIP function is reset to off. When you turn your product on, you must turn PIP on again to watch in the PIP mode.

  • Page 150: Screen Burn Protection

    System Screen Burn Protection MENU System Screen Burn Protection ENTER To reduce the possibility of screen burn, this unit is equipped with Pixel Shift screen burn prevention technology. Pixel Shift moves the picture slightly on the screen. The Pixel Shift Time setting allows you to program the time between movements of the picture in minutes.

  • Page 151: Timer

    System 8.8.2 Timer You can set the timer for Screen Burn Protection. Repeat Interval If you start the operation to erase any residual image, the operation will be performed for the set period of time and then automatically finish. Mode: You can change the Safety Screen Type.

  • Page 152: Video Wall

    System Video Wall MENU System Video Wall ENTER Customize the layout of multiple displays that are connected to form a video wall. In addition, display part of a whole picture or repeat the same picture on each of the connected multiple displays. To display multiple images, refer to MDC Help or the MagicInfo user guide.

  • Page 153: Horizontal

    System 8.9.3 Horizontal This function automatically divides the screen according to the specified number of horizontal displays. Enter the number of horizontally arranged displays. The horizontal screen will automatically be divided according to the number entered. A maximum of 15 displays can be assigned to the horizontal arrangement.

  • Page 154: Source Autoswitch Settings

    System 8.10 Source AutoSwitch Settings MENU System Source AutoSwitch Settings ENTER Turning on the display with Source AutoSwitch On, and the previous video source selection is not active, the display will automatically search the different video input sources for active video. Source AutoSwitch When the Source AutoSwitch...

  • Page 155: General

    System 8.11 General MENU System General ENTER General Max. Power Saving Game Mode BD Wise Auto Power Standby Control Auto Lamp Schedule OSD Display The displayed image may differ depending on the model. 8.11.1 Max. Power Saving Turns off the product to reduce power consumption after the PC has been left idle for a specified period of time.

  • Page 156: Bd Wise

    System 8.11.3 BD Wise Provides the optimal picture quality for Samsung DVD, Blu-ray and Home Theater products which support Wise. When BD Wise is turned On, the picture mode is automatically changed to the optimal resolution. Available when you connect Samsung products that support...

  • Page 157: Power On Adjustment

    System 8.11.8 Power On Adjustment You can set the warm-up time for the screen to turn on after the power button is pressed. (Range: 0 – 50 seconds) A warm-up time that is too short may damage the product due to overvoltage. 8.11.9 Temperature Control Temperature Control This function detects the internal temperature of the product.

  • Page 158: Video Sync (Me75B Models Only)

    System 8.11.11 3D Video Sync (ME75B models only) Synchronize the displays with your 3D glasses when viewing a 3D video using multiple displays. 3D Video Sync Current Mode Main Main Device Number Select Main Device ------ Refresh Close The displayed image may differ depending on the model. Current Mode: Select the desired option from Stand-Alone, Main, and Secondary.

  • Page 159: Anynet+(Hdmi-Cec)

    Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung product remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it.

  • Page 160: Auto Turn Off

    System Anynet+ Menu Description (device_name) Tools Shows the tools menu of the connected device. E.g. if a DVD player is connected, the tools menu of the DVD player will appear. Depending on the device, this menu may not be available. (device_name) Title Menu Shows the title menu of the disc in the connected device.

  • Page 161: Receiver

    System 8.12.3 Receiver You can listen to sound through a Receiver (i.e. Home Theater) instead of the product Speaker. To listen to sound through a receiver, go to Receiver screen (System Anynet+ (HDMI-CEC) Receiver). Then select Receiver and set to On. If your Receiver supports audio only, it may not appear in the device list.

  • Page 162: Divx® Video On Demand

    System Problem Possible Solution The connected device is not Check whether or not the device supports Anynet+ functions. displayed. Check whether or not the HDMI cable is properly connected. Check whether Anynet+ (HDMI-CEC) is set to in the Anynet+ setup menu. Search Anynet+ devices again.

  • Page 163: Network Remote Control

    System Network Remote Control ENTER Turn on/off or give permission to Samsung mobile phone devices to connect with and control the product. You must have a Samsung Mobile phone/device which supports Wireless Remote Control. For more details, refer to each device’s manual.

  • Page 164: Support

    9.1.1 By USB To upgrade by USB, follow these steps: Visit www.samsung.com. Download the latest USB software upgrade exe archive to your computer. Extracts the exe archive to your computer. You should have a single folder with the same name as the exe file.

  • Page 165: Contact Samsung

    Support Contact Samsung MENU Support Contact Samsung ENTER View this information when your product does not work properly or when you want to upgrade the software. You can find information regarding our call centers and how to download products and software.

  • Page 166: Magicinfo Lite

    MagicInfo Lite 10.1 File Formats Compatible with MagicInfo Lite Player [Read before using MagicInfo Lite Player] Supported USB-device file systems include FAT16 and FAT32. (NTFS is not supported.) A file with a vertical and horizontal resolution larger than the maximum resolution cannot be played.
  • Page 167 MagicInfo Lite Frame Bit rate Audio File Container Video Codec Resolution Extension rate(fps) (Mbps) Codec H.264 BP / MP / ADPCM / 1920x1080 6 ~ 30 *.3gp 3GPP AAC / HE-AAC MPEG4 SP / ASP 1920x1080 6 ~ 30 24 / 25 / MPEG1 352x288 AC3 /...
  • Page 168 MagicInfo Lite Audio Audio content without video is not supported. (Only mp3 files are supported as background music for image/PPT slideshows. This feature is available only when using the network schedule menu.) Audio content with a Bit rate or Frame rate larger than the rate specified in the table above can cause choppy audio during playback.
  • Page 169 MagicInfo Lite Power Point Compatible document file formats Extension : ppt, pptx Version : Office 97 ~ Office 2007 Functions not supported Animation effect 3D shapes (which will be displayed in 2D) Header and footer (some subitems are not supported) Word Art Align (A group alignment error may occur) Office 2007 (SmartArt is not fully supported.

  • Page 170: Network Schedule

    MagicInfo Lite 10.2 Network Schedule 10.2.1 Connecting to a server To use the MagicInfo Lite Server, the clock on the monitor must be set through the server (web). To use local schedules and AutoPlay only, without using the MagicInfo Lite Server, the clock must be set using the remote control.

  • Page 171: Magicinfo Lite Settings

    MagicInfo Lite 10.2.2 MagicInfo Lite Settings MENU Media MagicInfo Lite ENTER Press the MagicInfo Lite button on the remote control. You can view whether the server is connected (approval) in the MagicInfo Lite menu screen. To view whether the server is connected when a network schedule is running, press INFO on the remote.
  • Page 172 MagicInfo Lite Select Device from the top menu bar. Select Lite Device from the menus on the left. 10 MagicInfo Lite...
  • Page 173 MagicInfo Lite Select View Unapproved Lite Device from the sub-menus of Lite Device. Select the Approve button for your device from the list of unapproved Lite devices. Pressing the INFO button on the remote when a network schedule is running will display the details of the schedule.
  • Page 174 MagicInfo Lite Select the View All Lite Device menu to check that the device has been registered. When the device is approved by the server, the schedule registered in the selected group will be downloaded to the device. The schedule will run after it is downloaded. For further details on how to configure a schedule, refer to the <MagicInfo server user's manual>.

  • Page 175: Setting The Current Time

    MagicInfo Lite 10.2.4 Setting the current time A schedule may not run if the time set on the device is different from the server's current time. Go to the tabs Device Time. Select your device. Select Clock Set, and sync the time with the server. For further details on how to manage the time (scheduling, holiday management, etc.), refer to the <MagicInfo server user's manual>.

  • Page 176: Local Schedule Manager

    MagicInfo Lite 10.4 Local Schedule Manager Configure the settings for playback from Local Schedule. Alternatively, select and play content from internal or USB memory according to the customized playback sequence. 10.4.1 Registering a Local Schedule Select Local Schedule Manager in the MagicInfo Lite menu screen.
  • Page 177 MagicInfo Lite E.g.) PM 09:00 - AM 12:00 / AM 12:00 - AM 06:00 Create Time Contents Time --:-- am ~ --:-- pm Save Contents No Item Cancel Select Contents to specify the content you want to play. Contents Internal Memory No Item Folder1 Menu1.jpg...

  • Page 178: Modifying A Local Schedule Local Schedule

    MagicInfo Lite Check that the schedule has been added to the Local Schedule Manager. Local Schedule Manager Create Storage Internal Memory Edit No Playing Schedule Delete 20110101_1200.Isch Info Close 10.4.2 Modifying a local schedule Local Schedule Ensure at least one local schedule Local Schedule is registered.

  • Page 179: Deleting A Local Schedule Local Schedule

    MagicInfo Lite Select the local schedule you want to modify. Local Schedule Manager Create Storage Internal Memory Edit No Playing Schedule Delete 20110101_1200.Isch Info Close Select Edit. Edit Time 12:00 am ~ 02:00 pm Delete Contents Menu1.jpg Time --:-- am ~ --:-- pm Save Contents No Item...
  • Page 180 MagicInfo Lite Select Local Schedule Manager in the MagicInfo Lite menu screen. Network Schedule Local Schedule Local Schedule Manager Contents Manager Close Internal AutoPlay USB AutoPlay Mode Server Network Schedule Connected Disconnected Select the local schedule you want to delete. Local Schedule Manager Create Storage...

  • Page 181: Running A Local Schedule Local Schedule

    MagicInfo Lite 10.4.4 Running a local schedule Local Schedule Ensure at least one local schedule Local Schedule is registered. Select Local Schedule Manager in the MagicInfo Lite menu screen. Network Schedule Local Schedule Local Schedule Manager Contents Manager Close Internal AutoPlay USB AutoPlay Mode Server...

  • Page 182: Stopping A Local Schedule Local Schedule

    MagicInfo Lite 10.4.5 Stopping a local schedule Local Schedule This function is enabled only when a schedule is running. Selecting Stop will change the running mode from Local Schedule Network Schedule. Select Local Schedule Manager in the MagicInfo Lite menu screen. Network Schedule Local Schedule Local Schedule Manager...

  • Page 183: Viewing The Details Of A Local Schedule Local Schedule

    MagicInfo Lite 10.4.6 Viewing the details of a local schedule Local Schedule Select Local Schedule Manager in the MagicInfo Lite menu screen. Network Schedule Local Schedule Local Schedule Manager Contents Manager Close Internal AutoPlay USB AutoPlay Mode Server Network Schedule Connected Disconnected Select the local schedule you want to view the details of.

  • Page 184: Copying Content

    MagicInfo Lite 10.5 Contents Manager 10.5.1 Copying content Select Contents Manager in the MagicInfo Lite menu screen. Network Schedule Local Schedule · Local Schedule Manager Contents Manager Close Internal AutoPlay USB AutoPlay Mode Server Network Schedule Connected Disconnected Select the content you want to copy. If content under Internal Memory is selected: You can copy the content under...

  • Page 185: Deleting Content

    MagicInfo Lite 10.5.2 Deleting content Select Contents Manager in the MagicInfo Lite menu screen. Network Schedule Local Schedule · Local Schedule Manager Contents Manager Close Internal AutoPlay USB AutoPlay Mode Server Network Schedule Connected Disconnected Select the content you want to delete. Content under Internal Memory memory can be deleted at the same time.

  • Page 186: Internal Autoplay

    MagicInfo Lite 10.6 Internal AutoPlay 10.6.1 Running Internal AutoPlay Ensure at least one content item exists under Internal Memory. Select Internal AutoPlay in the MagicInfo Lite menu screen. Play content, which has been copied to Internal Memory, in alphabetical order. Network Schedule Local Schedule Local Schedule Manager...

  • Page 187: Usb Autoplay

    MagicInfo Lite 10.7 USB AutoPlay 10.7.1 Running USB AutoPlay Ensure a USB device is inserted. Be sure to create a folder named "MagicInfoSlide" in the USB device and put content in the folder. Select USB AutoPlay in the MagicInfo Lite menu screen.

  • Page 188: Changing The Settings For The Content That Is Running

    MagicInfo Lite Schedule Download: Displays the progress of a network schedule being downloaded from the server. Information Software Version : A-VNUSCDSP-100 Device Name : Monitor Device ID : FE-FF-FF-FF-FF Mode : Network Schedule Server : Connected : Connected Schedule Download : No Schedule to download Close 10.8.2 Changing the settings for the content that is running...

  • Page 189: Troubleshooting Guide

    11.1 Requirements Before Contacting Samsung Customer Service Center 11.1.1 Testing the Product Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Check if your product is operating normally by using the product test function.
  • Page 190 Troubleshooting Guide Screen issue The power LED is off. The screen will not Make sure that the power cord is connected. switch on. ("2.2 Connecting and Using a PC") "No Signal" is displayed on the screen (refer to Check that the product is connected correctly with a "Connecting to a PC").
  • Page 191 Troubleshooting Guide Sound issue There is no sound. Check the connection of the audio cable or adjust the volume ("2.2 Connecting and Using a PC") Check the volume. The volume is too low. Adjust the volume. If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound card or software program.
  • Page 192 Troubleshooting Guide 11.2 Q & A Question Answer How can I change the Set the frequency on your graphics card. frequency? "Windows XP": Go to Control Panel Appearance and Themes Display Settings Advanced Monitor and adjust the frequency in Monitor Settings. "Windows ME/2000": Go to Control Panel Display Settings...

  • Page 193: Specifications

    Specifications 12.1 General Model Name ME65B ME75B Size 65 inches (163 cm) 75 inches (190.5 cm) Panel 1428.48 mm (H) x 803.52 mm (V) 1650.24 mm (H) x 928.26 mm (V) Display area 56.2 inches (H) x 31.6 inches (V) 64.97 inches (H) x 36.55 inches (V) 1678.2 x 958.7 x 49.9 mm / 44.1 kg 1480.5 X 855.5 X 32.2 mm / 25.1 kg...
  • Page 194 Hereby, Samsung Electronics, declares that this Monitor is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The official Declaration of Conformity may be found at http://www.samsung.com, go to Support > Search Product Support and enter the model name.

  • Page 195: Powersaver

    Specifications 12.2 PowerSaver The power-saving function of this product reduces power consumption by switching off the screen and changing the color of the power LED if the product is not used for a specified period of time. The power is not turned off in power-saving mode. To switch the screen back on, press any key on the keyboard or move the mouse.

  • Page 196: Preset Timing Modes

    Specifications 12.3 Preset Timing Modes This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a resolution other than the specified resolution may degrade the picture quality.
  • Page 197 Specifications Horizontal Vertical Sync Pixel Clock Resolution Frequency Frequency Polarity (MHz) (kHz) (Hz) (H/V) VESA, 1366 x 768 47.712 59.790 85.500 VESA, 1440 x 900 55.935 59.887 106.500 VESA,1600 x 900(RB) 60.000 60.000 108.000 VESA, 1680 x 1050 65.290 59.954 146.250 VESA, 1920 x 1080 67.500...

  • Page 198: License

    Specifications 12.4 License TheaterSound HD, SRS and symbol are trademarks of SRS Labs, Inc. TheaterSound HD technology is incorporated under license form SRS Lab, Inc. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol aretrademarks of Dolby Laboratories. Manufactured under license under U.S.

  • Page 199: Appendix

    Appendix Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. NORTH AMERICA U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung.com CANADA 1-800-SAMSUNG (726-7864) http://www.samsung.com/ca (English) http://www.samsung.com/ca_fr (French) MEXICO 01-800-SAMSUNG (726-7864) http://www.samsung.com...
  • Page 200 (Dutch) http://www.samsung.com/be_fr (French) BOSNIA 05 133 1999 http://www.samsung.com BULGARIA 07001 33 11 , normal tariff http://www.samsung.com CROATIA 062 SAMSUNG (062 726 7864) http://www.samsung.com CYPRUS 8009 4000 only from landline http://www.samsung.com (+30) 210 6897691 from mobile and land line Appendix...
  • Page 201 808 20 - SAMSUNG (808 20 7267) http://www.samsung.com RUMANIA 08008 SAMSUNG (08008 726 http://www.samsung.com 7864) TOLL FREE No. SERBIA 0700 Samsung (0700 726 7864) http://www.samsung.com SLOVAKIA 0800 - SAMSUNG (0800-726 786) http://www.samsung.com SPAIN 902 - 1 - SAMSUNG (902 172 678) http://www.samsung.com Appendix...
  • Page 202 Appendix EUROPE SWEDEN 0771 726 7864 (SAMSUNG) http://www.samsung.com SWITZERLAND 0848-SAMSUNG http://www.samsung.com/ch (7267864, CHF 0.08/min) (German) http://www.samsung.com/ch_fr (French) 0330 SAMSUNG (7267864) http://www.samsung.com ARMENIA 0-800-05-555 http://www.samsung.com AZERBAIJAN 088-55-55-555 http://www.samsung.com BELARUS 810-800-500-55-500 http://www.samsung.com GEORGIA 0-800-555-555 http://www.samsung.com KAZAKHSTAN 8-10-800-500-55-500 http://www.samsung.com (GSM: 7799) KYRGYZSTAN 00-800-500-55-500 http://www.samsung.com...
  • Page 203 1800 3000 8282 1800 266 8282 INDONESIA 0800-112-8888 http://www.samsung.com 021-5699-7777 JAPAN 0120-327-527 http://www.samsung.com MALAYSIA 1800-88-9999 http://www.samsung.com NEW ZEALAND 0800 SAMSUNG (0800 726 786) http://www.samsung.com PHILIPPINES 1-800-10-SAMSUNG (726-7864) http://www.samsung.com for PLDT 1-800-3-SAMSUNG (726-7864) for Digitel 1-800-8-SAMSUNG (726-7864) for Globe 02-5805777 SINGAPORE 1800-SAMSUNG (726-7864) http://www.samsung.com...
  • Page 204 Appendix MIDDlE EAST MOROCCO 080 100 2255 http://www.samsung.com OMAN 800-SAMSUNG (726-7864) http://www.samsung.com/ae (English) http://www.samsung.com/ae_ar (Arabic) SAUDI ARABIA 9200-21230 http://www.samsung.com/ae (English) http://www.samsung.com/ae_ar (Arabic) TURKEY 444 77 11 http://www.samsung.com U.A.E 800-SAMSUNG (726-7864) http://www.samsung.com AFRICA ANGOLA 91-726-7864 http://www.samsung.com BOTSWANA 0800-726-000 http://www.samsung.com CAMEROON 7095- 0077 http://www.samsung.com...

  • Page 205: Responsibility For The Pay Service (Cost To Customers)

    If a product damage is caused by; External impact or drop. Use of supplies or separatly sold product unspecified by Samsung. Repair from a person besides an engineer of outsourcing service company or partner of Samsung Electronics Co., Ltd. Remodeling or repairing the product by customer.

  • Page 206: Optimum Picture Quality And Afterimage Burn-In Prevention

    Appendix Optimum Picture Quality and Afterimage Burn-in Prevention Optimum Picture Quality To enjoy the optimum picture quality, go to Control Panel on your PC and adjust the resolution and refresh rate as follows. The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected.

  • Page 207: Prevention Of Afterimage Burn-In

    Appendix Prevention of Afterimage Burn-in What is afterimage burn-in? Afterimage burn-in should not occur when the LCD panel is operating normally. Normal operation refers to a continuously changing video pattern. If the LCD panel displays a fixed pattern for an extended period of time (more than 12 hours), a slight voltage difference may occur between the electrodes in pixels that control the liquid crystals.
  • Page 208 Appendix Power off the product for 2 hours after using it for 12 hours. Go to Display Properties > Power Supply on your PC and set the product to power off as required. Using a screen saver is recommended. It is best to use a single-color or moving-image screen saver. Regular color Change Type 1 Type 2...

  • Page 209: Correct Disposal Of This Product (Waste Electrical & Electronic Equipment)

    Appendix Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.

  • Page 210: Terminology

    Appendix Terminology OSD(On Screen Display) On screen display (OSD) allows you to configure on-screen settings to optimize the picture quality as required. It allows you to change the screen brightness, tint, size and many other settings using menus displayed on the screen. Gamma The Gamma menu adjusts the grey scale that represents middle tones on the screen.
  • Page 211 Appendix Resolution Resolution is the number of horizontal pixels and vertical pixels that form a screen. It represents the level of display detail. A higher resolution displays a greater amount of information on the screen and is suitable for performing multiple tasks at the same time. E.g.
  • Page 212 Reset All Changing the Resolution Connecting and Using a PC Connecting to a Video Device Connection Using an IR Stereo Cable Screen Adjustment Contact SAMSUNG WORLD WIDE Screen Position Custom settings screen Sleep Timer Software Upgrade Source AutoSwitch Settings Specifications...

This manual is also suitable for:

Me65b

Table of Contents