Samsung ME75B User Manual page 110

4
Screen Adjustment
- Depth
L/R Change (L/R Image
3D 2D (Off
This function is deactivated when
3D Auto View (Off
"Side by Side" format HDMI signal with one of the resolutions below is automatically switched to 3D.
If you set 3D Auto View
appears when the product receives a 3D signal.
If a 3D failure occurs due to a 3D information error, set
select a
3D Optimize
Support resolution (16:9 only)
Resolution supported for HDMI PC mode
The resolution for HDMI PC mode is optimized to 1920 x 1080 input.
An input resolution other than 1920 x 1080 may not be displayed properly in 3D display or full screen
mode.
How to watch the 3D image
Method 1
Some 3D modes may not be available depending on the format of the image source.
To watch in 3D, wear 3D Active Glasses and press the power button on the glasses.
1
Press the
press the [
2
Use the
3
Use the
4
Using the
to view.
(1~10): Adjust the overall depth.
/ R/L Image): Swap the left and right pictures.
/ On): Displays the image for the left eye only.
3D Mode
/ Message Notice (or
to Message Notice
3D Mode using the corresponding menu.
(or 3D Optimisation): The overall adjustment of 3D effect.
Resolution
1280 x 720p
1920 x 1080i
1920 x 1080p
MENU button on your remote, use the
] button.
or button to select 3D, and then press the [
or button to select 3D
or buttons on your remote control, select the
set to "2D 3D" or Off.
Message Alert) / On): If 3D Auto View
(or Message Alert), a pop up message window
3D Auto View
Frequency (Hz)
25 / 50 Hz
25 / 50 Hz
25 / 50 Hz
or button to select Picture, and then
] button.
Mode, and then press the [
3D Mode
is set to On, a
to Off and manually
] button.
of the image you want
110
4 Screen Adjustment