Wps(Pbc) - Samsung ME75B User Manual

7
Network
7
When done, use the
8
The network connection screen appears and the verification process starts. Press [
Select IP Settings
9
Select the field on the top, press [
10
Press the
11
Enter the first portion of the
keys on your remote. Press the
12
Enter the next portion of the
13
Repeat the entry process for each field in the
If you make a mistake when entering a number, re-enter the number to correct it. You can also
press the
14
When done entering the
15
Press the
16
Repeat the same entry process for
17
When done, select
screen appears and the verification process starts. When the connection has been verified, the
"Internet is connected successfully." message appears.

7.1.5 WPS(PBC)

How to set up using WPS(PBC)
If your router has a
1
Go to Network Setting
2
Select WPS(PBC), press [
3
Press the WPS(PBC)
the network setting values it needs and connects to your network.
4
The network connection screen appears, and network setup is done.
button to move the cursor to Next, and then press the [
on the network connection screen. The
], and then set
button on your remote to go to the
IP Address
button to go to the next field.
IP Address. Press the
or button to change the number one unit at a time.
IP Address, press [
button to go to the Subnet Mask
Subnet
OK at the bottom of the page, and then press [
WPS(PBC) button, follow these steps:
screen.
], and then press [
button on your router within 2 minutes. Your product automatically acquires all
IP Settings
IP Mode to Manual.
IP Address entry field, and then press [
(for example, 105) into the first entry field using the number
button to go to the next field.
IP Address.
].
fields, and then press [
Mask, Gateway, and DNS
] again.
] button.
] to cancel.
screen appears.
].
].
Server.
]. The network connection
139
7 Network