Reference; Firmware Upgrade - Samsung DVD-H1080R User Manual

reference

Firmware upgrade

Introduction
Samsung will often support the software upgrade to improve
the performance of this unit to the latest status, through
Samsung Internet Site (www.samsung.com).
Because the specially new mpeg4 codec continues and it is
appearing. What improvements are made depends on the
upgrade software you are using as well as the software that
your DVD-player contained before the upgrade.
How to make an upgrade disc
Write the downloaded file onto a blank CD-R or CD-RW disc,
using the following settings :
1. You have to download a new file through Download Center
of Samsung Internet Site (www.samsung.com).
2. Write the file to Disc using CD-RW of your computer.
Note
- File system CD-ROM
- Character set ISO 9660
- Finalized, single session
- Write speed low
Upgrade procedure
1. Open the disc tray of your DVD-Player.
Place the burned disc on the tray. Close the tray.
The Firmware upgrade screen will appear.
Upgrade file detected
Curent version: 07.01.03.08.H1080XAA
Update version: 07.02.03.09.H1080XAA
Upgrade ?
Press Play to start
2. Press enter or play upgrade
- Press any other button on the remote control to cancel the
upgrade and eject the dics (eg.π etc).appear.
Upgrade file detected
Curent version: 07.01.03.08.H1080XAA
Update version: 07.02.03.09.H1080XAA
Upgrade ?
Press Play to start
File copying
Firmware upgrade
menu appears
Firmware upgrade
starts
Upgrade file detected
Curent version: 07.01.03.08.H1080XAA
Update version: 07.02.03.09.H1080XAA
Upgrade ?
Press Play to start
Upgrade
- During the firmware upgrade process, the tray will open.
Please remove the disc and wait for about 2 minutes.
- If the DVD player was successfully updated, the disc
tray will close and the unit will turn off and on.When the
unit turns on, the Select Menu Language screen will
appear.
3. Press the π/† buttons to select the desired language, and
then press the ENTER button.
Note
- If the "Select Menu Language" doesn't appear,
please contact Samsung Customer Service.
- Do not press any button or unplug the power cord
during the upgrade.
- The upgrade procedure may change, refer to the
web site (www.samsung.com).
Firmware upgrade
menu starts
Select Menu Language
English
Français
Deutsch
Español
Italiano
Nederlands
English _