Setting Up The Display Options - Samsung DVD-H1080R User Manual

❶ Dolby Digital Out
- PCM : Converts to PCM(2CH) audio.
- Bit stream : Outputs Dolby Digital via digital output.
Select Bit stream when connecting to a
Dolby Digital Decoder.
❷ MPEG2 Digital Output
- PCM : Converts to PCM (2CH) audio.
- Bit stream : Converts to MPEG-2 Digital Bit stream
(5.1CH). Select Bit stream when
using the Digital Audio Output.
Note
- When playing discs that have MPEG Audio in
bit stream selection, the coaxial may not have any
audio output. This depends on the AV receiver.
❸ Dynamic Compression
- On : To select dynamic compression. This is useful for
watching movies late at night, as it balances the
loud and quiet portions of a disc.
- Off : To select the standard range.
❹ PCM Down Sampling
- On : Select this when the Amplifier connected to the
player is not 96KHz compatible.
In this case, the 96KHz signals will be down
converted to 48KHZ.
- Off : Select this when the Amplifier is connected to the
player if it is 96KHz compatible. In this case, all
signals will be output without any changes.
❺ Power music on
This menu is used to activate or deactivate the opening
sound when you turn on the DVD player.
- On : To turn On Start up music.
- Off : To turn Off Start up music.
Note
- Even when PCM Down sampling is Off.
- Some discs will only output down sampled audio
through the digital outputs.
- To make the setup menu disappear, press the
MENU button.
HDMI
- If your TV is not compatible with compressed multi channel
formats (Dolby Digital, DTS, MPEG), you should set Digital
Audio to PCM.
- If your TV is not compatible with LPCM sampling rates over
48k Hz, you should set PCM Down sampling to on.
Manufactured under license from Dolby
Laboratories. "Dolby" and the double-D symbol
are trademarks of Dolby Laboratories.
"DTS" and "DTS Digital Out" are trademarks of
Digital Theater Systems, Inc.
Setting Up the display op-
tions
Display options enable you to set various video functions of
the player.
1. Press the MENU button.
2. Press the √/® buttons to select Display Setup Page,
then press the † or ENTER button.
3. Press the π/† buttons to select the desired item, then
press the ® or ENTER button.
– To make the setup menu disappear, press the MENU but
ton.
❶ TV Aspect
Depending on a type of television you have, you may
want to adjust the screen setting (aspect ratio).
- 4:3 Pan&Scan : Select this for conventional size TVs
when you want to see the central portion of the 16:9
screen. (Extreme left and right side of movie picture
will be cut off.)
- 4:3 Letter Box : Select when you want to see the total
16:9 ratio screen DVD supplies, even though you
have a TV with a 4:3 ratio screen. Black bars will
appear at the top and bottom of the screen.
- 16:9 Wide : You can view the full 16:9 picture on your
wide screen TV.
❷ Screen Messages
Use to turn on-screen messages On or Off.
-- Display Setup Page --
TV Aspect Wide
Screen Message On
Video Output I-Scan
Black Level Off
TV System PAL
DivX VOD
-- Display Setup Page --
TV Aspect Wide
4:3 Pan&Scan
4:3 Letter Box
Screen Message On
16:9 Wide
Video Output I-Scan
Black Level Off
TV System PAL
DivX VOD
English _29