Table of Contents
Advertisement
REFERENCE
REFERENCE
Firmware upgrade
Introduction
Samsung will often support the software upgrade
to improve the performance of this unit to the
lastest status , trough samsung Internet
Site(www.samsung.com)
Because the specially new mpeg4 codec conti-
nuse and it is appearing.What improvements are
made depends on the upgrade software your are
using as well as the software that your DVD-play-
er contained before the upgrde.
How to make an upgrade disc
Write the downloaded file onto a blank CD-R or CD-
RW disc, using the following settings:
You have to download a new file trough Download
1.
center of Samsung Internet Site (http://www.sam
sung.com).
Write the file to disc using CD-RW driver of your
2.
computer.
Note
- File system CD-ROM
- Chracteer set ISO 9660
- Finalized, single session
- Write speed low
Update procedure
1.Open the disc tray. Place disc the on the tray.
close the tray. The Firm ware Upgrade sreen
appears.
31
Firmware Upgrade
Old Version: 071018.V0.B.P182XTL
New Version: 071105.V1.B.P182XTL
Cancel
Total
Firmware Upgrade Appears
on the display
2.Press the
buttons to select Total.the
/
press the ENTER button
- In the middle of the writing, the tray will open
automatically. After taking out the disc, please
wait for about 2 minutes.
- If the unit was succesfully update, the unit will
turn off and on after closing the tray automatically.
When the unit turns on, this screen will display.
3.Press the number buttons to select the
desired language
Note
- If the "Select Menu Language"doesn't appear,
please contact to "Samsung Service Center- If
the unit was succesfully update, the unit will
turn off and on after closing the tray automatical
- Do not press any button and plug the power code
during upgrade.
- The upgrade procedure may change, refer to the
web site( www.samsung.com)
Firmware Upgrade
Old Version: 071018.V0.B.P182XTL
New Version: 071105.V1.B.P182XTL
Cancel
Total
Now Loading ...
***CAUTION!!!**
When the tray is opened
Do not turn off the player
untill it goes off automatically
Firmware Upgrade Appears
on the display
Advertisement
Table of Contents
