Basic Functions; Playing A Disc - Samsung DVD-H1080R User Manual

basic functions

Playing a Disc

Before Play
- Turn on your TV and set it to the correct Video
Input by pressing TV/VIDEO button on the TV
remote control.
- If you connected an external Audio System, turn
on your Audio System and set it to the correct
Audio Input.
After plugging in the player, the first time you press the DVD
POWER button, this screen comes up: If you want to select
a language, Press the π/† buttons, and then press the
ENTER button. (This screen will only appear when you plug
in the player for the first time.)
If the language for the startup screen is not set, the set-
tings may change whenever you turn the power on or off.
Therefore, make sure that you select the language you want
to use.
Once you select a menu language, you can change it by
pressing the ( ) button on the front panel of the unit
for more than 5 seconds with no disc in the unit. Then the
SELECT MENU LANGUAGE window appears again where
you can reset your preferred language.
Playback
1. Press the OPEN/CLOSE ( ) button. The STANDBY indi-
cator light goes out and the tray opens.
2. Place a disc gently into the tray with the disc's label fac-
ing up.
3. Press the PLAY ( ) button or OPEN/ CLOSE ( ) but-
ton to close the disc tray. When you stop disc play, the
player remembers where you stopped, so when you
press PLAY ( ) button again, it will pick up where you
left off.
7. Slow Motion Play
Press the SEARCH (
speed between 1/2, 1/4 1/8 and 1/16th of normal speed
- No sound is heard during slow mode.
- Press the PLAY( ) button to resume normal play.
- Each time the button is pressed, a new frame will
Select Menu Language
English
Français
Deutsch
Español
Italiano
Note
Nederlands
- If the player is left in the stop mode for more
- If the player is left in the stop mode for more than
- If the player is left for about 5 minutes in pause
- This (
4. Stopping Play
Press the STOP ( ) button during play.
5. Removing Disc
Press the OPEN/CLOSE (
6. Pausing Play
Press the PAUSE ( ) button on the remote control during
play.
- Screen stops, no sound.
To resume, press the PLAY ( ) button once again.
/
during PAUSE mode.
8. Step Motion Play (Except CD)
Press the SKIP ( ) button on the remote control
during PAUSE mode.
appear.
- No sound is heard during STEP mode.
- Press the PLAY ( ) button to resume normal play.
- You can only perform step motion play in the forward
direction.
than one minute without any user interaction, a
screen saver will be activated. Press the PLAY
( ) button to resume normal play.
about 30 minutes, the power will automatically
shut off.(Automatic Power-Off Function)
mode, it will stop.
) icon indicates an invalid button press.
) button.
) button to choose the play
English _1