Description - Samsung DVD-H1080R User Manual

setup

Description

Front Panel Controls
1. STANDBY/ON (
When STANDBY/ON is pressed on, the indicator goes
out and the player is turned on.
2. STANDBY Indicator
When the unit is first plugged in, the indicator lights.
3. DISC TRAY
Place the disc here.
Rear Panel
1. DIGITAL AUDIO OUT JACKS
- Use coaxial digital cable to connect to a compatible
Dolby Digital receiver.
- Use coaxial digital cable to connect to an A/V
Amplifier that contains a Dolby Digital, MPEG2 or
DTS decoder.
2. COMPONENT VIDEO OUT JACKS
- Use these jacks if you have a TV with Component
Video in jacks. These jacks provide P R , P B and Y
video.
- If P-SCAN Video Output is selected in Setup Menu,
progressive scan mode will work.
- If I-SCAN Video Output is selected in Setup Menu,
interlaced scan mode will work.
3. AUDIO OUT JACKS
- Connect to the Audio input jacks of your television or
audio/video receiver.
_ setup
)
4. OPEN/CLOSE/Stop (
P ress to open and close the disc tray, Stops disc play.
5. PLAY/PAUSE (
Begin or pause disc play.
4. VIDEO OUT JACK
- Use a video cable to connect to the Video input jack
on your television.
5. USB Host
- Connect digital still camera, MP3 player, memory
stick, Card reader, or another removable storage
devices.
6. HDMI OUT JACK
- Use the HDMI cable to connect this jack to the HDMI
jack on your television for the best quality picture.
- If an HDMI cable is connected to an HDMI-compat-
ible TV, HDMI will be output automatically within 10
seconds.
)
)