Assembling The Front Speaker (Ht-Es4200 Only) - Samsung HT-E4200 User Manual

Assembling the Front Speaker (HT-ES4200 Only)

You can install the product in one of the following two ways:
Choose a desired one according to the installation area and your decoration plan.
Installing on the Partition
The front speakers can be combined by a partition.
1. Connect the left/right speakers to the
Partition.
2. Insert screws into the hole on the rear of each
speakers, and then use screwdriver to tighten
screws clockwise.
3. This is the appearance after the speaker is
installed.
Installing on the Table Stand
1. Connect the Speaker to the Stand Base.
2. Insert a screw into the hole on the rear of the
speaker, and then use screwdriver to tighten
a screw clockwise.
3. This is the appearance after the speaker is
installed. Follow this steps to install other
speaker.
1
Partition
2
3
1 2
Speaker
Stand
Base
3
17
|
English