connections
Please follow the steps below to install the speakers on the stands.
SPEAKER InSTALLATIOn (HT-BD2 OnLY)
How to Install the Speaker and the Stand
1.
Turn the stand upside down and mount it on the stand base.
.
Insert and tighten (Black) screws on the bottom side of the stand base.
3.
Place the stand on the floor. Insert and tighten 2 (Silver) screws
on the back of the stand.
Speaker Packages
Please confirm that all the following contents are included in the package.
Front/Surround Speaker
SPEAKER (4EA)
STAND BASE(4EA)
Front speakers and Surround speakers are
packaged separately as shown in the diagram.
1
STAND (4EA)
Subwoofer Speaker
Screw (16EA): Black
Screw (16EA): Silver
Speaker Wire (7EA)
STAND
BASE
STAND
Center Speaker
Surround Back
Speaker (2EA)
Audio Cable for Subwoofer
connection (1EA)