Turn On; Play; Play From A Bluetooth Device - Philips SBT310W/37 User Manual

Turn on

• Slide on the speaker to the right.
» The Bluetooth indicator flashes (blue).
Switch to standby mode
The speaker switches to standby mode
automatically in the following situations.
In Bluetooth mode: no audio signal from
•
your Bluetooth device over 15 minutes.
In MP3 link mode: no audio signal
•
detected over 15 minutes.
• The battery level is low.
Note
•
The Bluetooth connection will be terminated when the
speaker enters standby mode, you can wake up the
speaker by holding
You can also switch your speaker to standby
mode manual by sliding
for 2 seconds.
to the left.

4 Play

Play from a Bluetooth device

You can listen to a Buetooth device through this
speaker.
Note
•
The effective operation range between the speaker
and your Bluetooth device is approximately 10 meters
(30 feet).
1
Slide to the right to turn on Bluetooth
function of the speaker.
» The Bluetooth indicator flashes.
2
Activate the Bluetooth function in your
Bluetooth device (see the device user
manual).
3
Select "PHILIPS SBT310" on your device
for pairing.
» The speaker gives out 2 beeps and the
Bluetooth indicator stays steadily on.
• For elder devices, you need to input
"0000" as pairing password.
4
Start music play on your Bluetooth device .
PHILIPS SBT310 PIN
0000
EN 9