Change Light E Ect; Turn Decorative Light On Or O; Play Audio Through Bluetooth; Connect A Device - Philips TAX5206 User Manual

4

Change light e ect

Turn decorative light
on or o
1. In power on mode, press Light button
repeatedly to switch among di erent light
modes of speaker light.
2. In power on mode, press and hold Light
button for 3 seconds to switch on/o the
strobe light.
2
Light
3 sec
Light
Light mode 1
Light
Light mode 2
Light
Light mode 3
Light
Light mode 4
Light
Light
Strobe Light
On/O
5 Play audio
through Bluetooth
The product can stream music from your
Bluetooth device to the system through
Bluetooth.

Connect a device

Note
Before pairing a device with this product, read
its user manual for Bluetooth compatibility.
The product can memorize a maximum of eight
paired devices. The ninth paired device will
replace the rst one.
Any obstacle between this product and a
1
Bluetooth device can reduce the operational
range. Keep away from any other electronic
device that may cause interference.
The operational range between this product
and a Bluetooth device is approximately 10
meters (30 feet).
Connect a device
automatically
1 Press and hold
switch on the party speaker. The unit
automatically enters Bluetooth pairing mode,
and blue backlight of
light blink to remind you to connect with a
Bluetooth device.
2 On your Bluetooth device, enable
Bluetooth and search for Bluetooth
devices that can be paired.
3 Select [Philips TAX5206]
displayed on your device for pairing.
After successful connection, the blue
backlight of the

Connect a device manually

1 When the party speaker is in USB or Line in
source, short press
Bluetooth source and enter pairing mode.
Blue backlight of
light blink to remind you to connect with
a Bluetooth device.
2 On your Bluetooth device, enable
Bluetooth and search for Bluetooth
devices that can be paired.
button for 3 seconds to
button and blue speaker
button keeps solid.
button to switch to
button and blue speaker