Changing Eco Mode/Checking Energy-Saving Effect; Using Eco Mode [Eco Mode] - NEC NP-M271X User Manual

2. Press the  button.
The area of the magnified image will be moved
3. Press the D-ZOOM (−) button.
Each time the D-ZOOM (−) button is pressed, the image is reduced.
NOTE:
• The image will be enlarged or reduced at the center of the screen.
• Displaying the menu will cancel the current magnification.

 Changing Eco Mode/Checking Energy-Saving Effect

Using Eco Mode [ECO MODE]

The ECO MODE (NORMAL and ECO) increases lamp life, while lowering power consumption and cutting down on
CO emissions.
2
Four brightness modes of the lamp can be selected: [OFF], [AUTO ECO], [NORMAL] and [ECO] modes.
[ECO MODE]
[OFF]
[AUTO ECO]
[NORMAL]
[ECO]
To turn on the [ECO MODE], do the following:
1. Press the ECO Button on the remote control to display [ECO MODE] screen.
2. Press the ECO button again to select a mode you wish.
• Each time the ECO button is pressed, the choices will be changed:
OFF → AUTO ECO → NORMAL → ECO → OFF
TIP:
• The leaf symbol at the bottom of the menu shows the current selection of ECO mode.
Description
The lamp brightness is 100%.
Lamp power consumption will be changed between
[OFF] and [NORMAL] automatically according to
picture level
NOTE: A bright gradation may be less visible depending
on the image.
Lamp power consumption. (approx.80% brightness
on M311X/M271X/M271W and approx. 75% on
M361X/M311W) The lamp life will extend by lowering
the lamp power.
Lamp power consumption (approx. 60% brightness).
The lamp life will extend longer than the one on
NORMAL mode by controlling power appropriate for
the lamp. The maximum power becomes equivalent
to the power in NORMAL.
27
3. Convenient Features
Status of LAMP indicator
Off
Steady Green
light