Rear - NEC NP-M271X User Manual

Rear

Port Cover for Optional USB
Wireless LAN Unit
When using the optional USB
Wireless LAN Unit, first remove
the cover. (→ page 111)
Monaural Speaker (10 W)
Terminal Panel (→ page 7)
Built-in Security Slot (
Connect the supplied power cord's
three-pin plug here, and plug the
other end into an active wall outlet.
(→ page 14)
* This security slot supports the MicroSaver
Opening and closing the lens cover
Slide the lens cover to the left to uncover the lens.
To cover the lens, slide the lens cover to the right.
NOTE:
• The lens cover works in conjunction with the AV-MUTE function. Closing the lens cover will turn off the image and sound during
normal projector operation; opening it will restore the image and sound.
With the lens cover closed the image and sound is turned off, however the lamp is still lit. If the projector stays this way for about
2 hours, it will turn off automatically.
• Do not pull the lens cover with excessive force or apply strong pressure in either the up or down direction. Doing so can cause
damage to the lens cover sliding mechanism!
)*
AC Input
Security System.
®
5
1. Introduction
Lamp Cover (→ page 118)
Rear Foot (→ page 19)
Security chain opening
Attach an anti-theft device.
The security chain opening accepts
security wires or chains up to 0.18
inch/4.6 mm in diameter.