Electrolux EWF 1408 WDL User Manual page 16

Electrolux914 533 406
Hide thumbs Also See for EWF 1408 WDL:
Table of Contents

Advertisement

16 www.electrolux.com
• The drain pump can operate for a short
time when the appliance fills water.
After approximately 15 minutes
from the start of the programme:
• The appliance adjusts automati-
• The display shows the new val-
9.6 Starting a programme with
delay start
• Press
play shows the delay you want to set.
The related indicator comes on the dis-
play.
• Press
– The appliance starts the countdown.
– When the countdown is completed,
the programme starts automatically.
You can cancel or change the set
of the delay start before you press
To cancel the delay start:
1.
Press
pause.
2.
Press
Press
gramme immediately.
9.7 Interrupting a programme
and changing the options
You can change only some options be-
fore they operate.
1.
Press
2.
Change the options.
3.
Press
tinues.
9.8 Cancelling a programme
1.
Press the button
onds to cancel the programme and to
deactivate the appliance.
2.
Press the same button again to acti-
vate the appliance. Now, you can set
a new washing programme.
cally the programme duration
agree with the laundry load.
ue.
again and again until the dis-
:
.
to set the appliance to
until the display shows
again to start the pro-
. The indicator flashes.
again. The programme con-
for some sec-
The appliance does not drain the
water.
9.9 Opening the door
While a programme or the delay start op-
erates, the appliance door is locked and
the display shows the indicator
CAUTION!
If the temperature and level of the
water in the drum are too high,
you cannot open the door.
Open the appliance door when the
delay start operates:
1.
Press
to pause the appliance.
2.
Wait until the door lock indicator
goes off.
3.
Open the door.
4.
Close the door and press
The delay start continues to operate.
Open the appliance door when the
programme operates:
1.
Press the button
onds to deactivate the appliance.
2.
Wait for some minutes and then open
carefully the appliance door.
3.
Close the appliance door.
4.
Set the programme again.
'.
9.10 At the end of the
programme
• The appliance stops automatically.
• The acoustic signal operates (if it is acti-
vated).
• In the display a
• The indicator
• The door lock indicator
• Remove the laundry from the appliance.
Make sure that the drum is empty.
• Keep the door ajar, to prevent the mil-
dew and odours.
• Close the water tap.
• Press the button
to deactivate the appliance.
The washing programme is
completed, but there is water in the
drum:
– The drum turns regularly to prevent the
creases in the laundry.
.
again.
for some sec-
comes on.
goes off.
goes off.
for some seconds

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents