Air Filter; Fuel Filter - Echo GT-230 Operator's Manual

Echo trimmer user manual

Hide thumbs Also See for GT-230:

Table of Contents

AIR FILTER

Level 1.

Tools required:

Cleaning brush, 25 or 50 mm (1 or 2 in.) medium bristle

paint brush.

Parts required:

90008 REPOWER

Close choke (Cold Start Position). This prevents dirt from entering

the carburetor throat when the air filter is removed. Brush accumu-

lated dirt from the air cleaner area.

Remove the air cleaner cover. Clean and inspect the element for

damage. If element is fuel soaked and very dirty, replace.

If element can be cleaned and reused, be certain it:

-still fits the cavity in the air cleaner cover.

-is installed with the original side out.

NOTE

Carburetor adjustment may be needed after air filter cleaning/

replacement. See Carburetor Adjustment Section.

Level 1.

Tools required: Fuel line hook, 203-254 mm ( 8 - 10 in.) length of wire

with one end bent into a hook. Clean rag, funnel, and an approved fuel

container.

Parts required: 90008 REPOWER

WARNING

Fuel is VERY flammable. Use extreme care when mixing, storing or

handling.

Use a clean rag to remove loose dirt from around fuel cap and

empty fuel tank.

Use the "fuel line hook" to pull the fuel line and filter from the tank.

Remove the filter from the line and install the new filter.

AIR & FUEL FILTER KIT.

Air & Fuel Filter Kit

DANGER

Table of Contents