Maytag MVWB450WQ - Bravos 5.0 cu. Ft. IEC Capacity Washer Use And Care Manual page 19

TROUBLESHOOTING
First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions) to possibly avoid the
cost of a service call ... In USA www.maytag.com/help - In Canada www.maytag.ca.
If you experience
Error Code Appears in Display (cont.)
dU (Lid cannot unlock)
appears in display
F## code (F-type
error code) appears
in display
Fd (Factory Default)
Possible Causes
Objects on washer lid prevent it from
unlocking.
System error code.
Washer sets back to factory default.
Remove objects, such as a basket of laundry, from the top of
the washer.
Press START/PAUSE once to clear the code. Then press
START/PAUSE again to restart washer. If code appears again,
call for service.
To return all options and modifiers to Factory Default, press
POWER/CANCEL, select Drain & Spin cycle, and then press
Extra Rinse, Fabric Softener, Extra Rinse, Fabric Softener within
5 seconds. When done correctly, the 7-segment displays show
"Fd" for 3 seconds and then unit returns to Standby Mode.
Solution
19