HP P6080-63001 - Maxtor DiamondMax Plus 40 GB Hard Drive Getting Started page 50

Wireless keyboard and mouse (continued)
Symptom
Wireless keyboard or
mouse does not work or
is not detected.
(continued)
46 Getting Started (features vary by model)
Possible solution
3 Check that the mouse is on (B), and push and hold the
Connect button (C) on the underside of the mouse for
5 to 10 seconds until the LED (A) on the receiver lights or
stops flashing.
B
4 After the mouse connection is established, continue with
the steps that follow to repeat the procedure for the
keyboard.
5 Skip this step if your receiver model has no Connect
button (A).
Push the Connect button on the receiver (A), and hold it
for 5 to 10 seconds until the light starts to flash.
6 Push and hold the Connect button (D) on the underside of
the keyboard for 5 to 10 seconds until the LED (A) on the
receiver lights or stops flashing.
D
Refer to the documentation that came with the keyboard and
mouse for more information.
NOTE: The receiver
connection session times
out after 60 seconds. To
ensure the connection was
established, and that the
C receiver did not time out
instead, move the mouse
and check for response on
the screen.