HP P6080-63001 - Maxtor DiamondMax Plus 40 GB Hard Drive Getting Started page 16

Connecting the TV signal source with a set-top box and using S-video or
composite video cable to the computer
To use video output from the set-top box (F),
add the cables to route video and audio to the
computer:
Do not detach any cables from the
■
existing setup.
Connect an S-video cable (or you can
■
use an S-video-to-composite cable
adapter) to the S-Video In connector (H)
on the computer.
Connect audio cables to the audio right
■
(red) and left (white) connectors (J) on
the computer.
Connect the remote control cable/IR
■
blaster (select models only) (G) to the
IR OUT connector on the computer, and
then position the blaster on the set-top
box. This enables the computer to
change the channel on the box. See
"Using an infrared receiver (IR) blaster"
on page 13 for blaster placement
details.
12 Getting Started (features vary by model)