Alarm Input - Samsung SRD-450 User Manual

2. Use direction buttons (▲▼◄►) to move to a desired
item, and press the [ENTER] button to set the value.
•
SMART ALARM: Specify the availability of the alarm
if the HDD has a problem.
•
DISK FULL EVENT: Set to notify the user when the
HDD is full.
3. When your settings are completed, press the <APPLY>
button on the bottom.
Your settings will be applied.
4. Press the <CLOSE> button to display the confirmation
dialog and return to the previous menu.

ALARM INPUT

You can specify the availability of the alarm input and the alarm operation type.
Using the mouse may help easy setup.
1. Use the direction buttons to move to <ALARM INPUT>
in the left corner of the EVENT/SENSOR setup screen
and press the [ENTER] button.
2. Use direction buttons (▲▼◄►) to move to a desired
item, and press the [ENTER] button to set the value.
•
OPERATION: Set the connection status of the alarm
sensor to either ENABLE or DISABLE.
- If the alarm sensor is set to <ENABLE> and you have
set to perform recording if an alarm occurs, the Live
screen displays the alarm recording standby mode.
(Page 47)
•
TYPE: Specify the sensor type.
- N/O (Normal Open) : The sensor stays open at all times while the alarm operates if the sensor is
closed.
- N/C (Normal Close) : The sensor stays closed at all times while the alarm operates if the sensor is
open.
•
TEXT: To easily locate the alarming point when an event occurs, rename the alarming point.
3. When your settings are completed, press the <APPLY> button on the bottom.
Your settings will be applied.
4. Press the <CLOSE> button to display the confirmation dialog and return to the previous menu.
EVENT / SENSOR
HDD EVENT
SMART ALARM
DISK FULL EVENT
ALARM
INPUT
ALARM
OUTPUT
BUZZER OUT
E-MAIL
NOTIFICATION
CANCEL APPLY
EVENT / SENSOR
HDD EVENT
OPERATION TYPE
CH 1 ENABLE N / O
ALARM CH 2
ENABLE N / O
INPUT
CH 3 ENABLE N / O
CH 4 ENABLE N / O
ALARM
OUTPUT
BUZZER OUT
E-MAIL
NOTIFICATION
CANCEL APPLY
ON
OFF
CLOSE
TEXT
ALARM 1
ALARM 2
ALARM 3
ALARM 4
CLOSE
English _41