Starting Warm Engine - Echo PPT-260 Operator's Manual

Echo power pruner operator's manual
Hide thumbs Also See for PPT-260:
Table of Contents

Advertisement

STARTING WARM ENGINE

The starting procedure is the same as Cold Start except DO NOT close
the choke, and do not depress throttle trigger to wide open position.
WARNING
The attachment should not move at idle, otherwise serious personal
injury may result.
NOTE
If attachment moves, readjust carburetor according to "Carburetor
Adjustment" instructions in this manual or see your ECHO Dealer.
1.
Stop Switch.
Move Stop Switch button (A) forward away from the STOP
position.
2.
Primer Bulb
Pump primer bulb (C) until fuel is visible and flows freely in the
clear fuel tank return line. Pump bulb an additional 4 or 5 times.
3.
Recoil Starter.
Lay the unit on a flat, clear area and firmly grasp right hand grip
with left hand. Do not depress throttle trigger. Pull the recoil
starter handle (D) until the engine fires.
NOTE
If engine does not start after 5 pulls, use Cold Start Procedure.
O
DANGER
P
P
OWER
RUNER
'
M
PERATOR
S
A
TM
17
ANUAL
D
C

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ppt-260 - 03-03 1

Table of Contents

Save Article as PDF