Reversing Door - Frigidaire FRQG7000LW Installation Manual

REVERSING DOOR

1 Open door and remove four plugs in the door opening
opposite the hinges. Retain all parts for use later,
unless otherwise noted. (Figure 1).
Figure 2
2 Begin removing the four screws that attach the hinge to
the front panel. (Figure 2) Start by only removing one
screw per hinge. Then only loosen the two remaining
screws while fi rmly holding the door to prevent damage
to hinge, front panel or door. After the remaining
screws are loosened continue to remove all.
Figure 3
3 Place door on a towel (handle side down) to prevent
scratches to window. Remove all four remaining hinge
screws on edge of door. (Figure 3)
4 Remove four screws from edge of door opposite hinges.
18
Figure 1
5 Remove two door handle screws and two hole plugs
from door. (Figure 4)
Figure 5
6 Pull handle away from door assembly. (Figure 5)
7 Separate the outer door from the inner door assembly
with a putty knife or fl at screw driver. (Figure 6)
Figure 4
Figure 6