To Enable An External Fn Key - HP 4150 - OmniBook - PIII 500 MHz User Manual

If you connect a keyboard after docking the OmniBook with power on , the
keyboard may not be recognized. If this happens, suspend and then resume your
OmniBook to enable the system to recognize the keyboard.

To enable an external Fn key

If you are using a dock with an external keyboard, substitute the keystrokes
CTRL+ALT for Fn. If necessary, enable the external Fn key from the BIOS Setup
utility. This is enabled by default.
See the OmniBook's Reference Guide for a complete description of the BIOS Setup
utility.
1. Close all applications, then shut down Windows and reboot the OmniBook. If
necessary, you can press CTRL+ALT+DEL to reboot.
2. When you see the HP OmniBook logo displayed,
3. Use the right arrow key to highlight the System Devices menu.
4. Make sure External Fn Key is enabled.
5. Press F10 to save settings and exit Setup.
Using the Dock
1-25