Adjusting The Display Setting; Changing Display Types; Setting The Timer; Adjusting The Display Quality - Fujitsu N6010 - LifeBook - Mobile Pentium 4 3.2 GHz User Manual

Tv tuner user's guide
Hide thumbs Also See for N6010 - LifeBook - Mobile Pentium 4 3.2 GHz:
Table of Contents

Advertisement

ADJUSTING THE DISPLAY SETTING

This section describes how to adjust the setting of display quality when watching TV, a DVD, or
a video, how to change screen types, and how to set an off-timer.

Changing display types

When you display pictures of vertically and horizontally different sizes from the LCD display of
this notebook, display types can be selected.
Display Type
Normal
Pan & Scan
1.
Press the [Menu] button to display the menu and select "Display Type".
2.
Select the screen type you like and press the [Enter] button.

Setting the Timer

With use of the timer, Instant MyMedia can be automatically terminated and the power to this
notebook is turned off when the set time has been reached.
The timer can be set to one, two, or three hours.
1.
Press the [Menu] button to display the menu and select "Off-timer".
2.
Select the duration for the power to be turned off and press the [Enter] button. The off-
timer is set and the menu screen disappears.
—To change the setting to the off-timer, perform the same steps again.
—To cancel the off-timer, select "Disable".
3.
When the time specified has elapsed, Instant MyMedia is automatically terminated, power-
ing off the notebook
When recording on a DVD is being performed at the time when the power is
turned off using the off-timer, the off-timer is canceled, with the recording to be
continued. When Instant MyMedia is terminated before the setting time, the off-
timer is canceled.

Adjusting the display quality

The brightness and colors of the picture can be adjusted as you like. Each video adjustment is
applied to all TV, DVD/CD and video play modes. The setting cannot be changed by each mode.
1.
Press the [Menu] button to display the menu and select the "Video" tab.
34
Displays the image so that the vertical edges of the picture can be seen.
When a picture is entered with a screen ratio of 4:3, a black strip is dis-
played on the left and right corners of the screen.
The picture is enlarged so the left and right edges extend to the edge of
the screen. When the picture is displayed with a screen ratio of 4:3, the
vertical sides of the picture are cut.
.
Display Method

Advertisement

Table of Contents
loading

This manual is also suitable for:

N6010 4 3.2

Table of Contents