Log On To Target-Set Persistent Target; Available Targets Window-Connected Status - Cisco AJ732A - MDS 9134 Fabric Switch Configuration Manual

Figure 11 Log On to Target—Set persistent target
3.
Select the Automatically restore this connection when the system boots check box to ensure that the
controller port is enabled as a persistent target.
4. Click OK.
The Available Target window shows the status for the storage controller iqn as Connected
Figure 12 Available targets window—Connected status
5. Click the Active Sessions tab to verify the connection to the EVA.
The storage controller session Status appears as Connected (Figure 13).
C-Series iSCSI
(Figure 12).
23