Conﬁguring P-Class Blade Server Network Settings; Switch Ports Dashboard - Cisco AJ732A - MDS 9134 Fabric Switch Configuration Manual

Hp storageworks c-series iscsi configuration guide (aa-rw7pe-te, december 2006)

Hide thumbs Also See for AJ732A - Cisco MDS 9134 Fabric Switch:

Table of Contents

Figure 46 Switch Ports Dashboard

Conﬁguring p-Class Blade server network settings

Depending on the model, each p-Class Blade server has two or four network interfaces. These interfaces

are split between Interconnect A and Interconnect B. To ensure proper multi-path setup, one interface from

each interconnect is assigned a unique static IP address. In this example, 20.20.20.230 is the IP address

for one network interface, and 20.20.21.230 is the IP address for the other network interface

(Figure

47).

Table of Contents